User manual

6.2 Functions in DMX mode
Set DIP switch 10 to the ‘ON’ position to activate the DMX operating mode.
The value of the DIP switches 1-9 is binary coded. To set the desired DMX address, set the DIP
switches so that the sum of the resulting numbers yields the desired DMX address. Please
orient yourself by the following table:
SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 DMX address
0 0 0 0 0 0 0 0 1 1
0 0 0 0 0 0 0 1 0 2
0 0 0 0 0 0 1 0 0 4
0 0 0 0 0 1 0 0 0 8
0 0 0 0 1 0 0 0 0 16
0 0 0 1 0 0 0 0 0 32
Setting up the DMX address
Operating
26
ART-6 Fade
DMX controller