Specifications

4 Launch a web browser
B Boston _
such as Internet Explorer®,
Safari®, Firefox®, etc. Enter
http:/ /192.168.1.12
in the address bar.
5 Click on "Profile Configuration':
acoustiCS'
& Boston
acoustics•
Connection Status:
Signal Strength:
Wireless Channel:
Firmware Date:
Firmware Version:
Product Version:
Host Firmware Version:
WPSPIN:
good
2012·04-15
3.8.139.9111
64428147
6 Select the Wi-Fi network you
want to use from the Service Set
ID drop down list. Click Apply. If
your
network requires a password
you will need
to enter it. Enter
the password carefully- it is case
sensitive.
Serv;ce Set ID (SSID)
Tip: If you want to rename the
system you may do this first.
Enter a
new name in the "Digital
Media Player Name" box,
then click
"Apply".
7 An information box will be displayed -click OK.
8 The 0 button will f1ash orange while the system
reboots. The
AIR button will f1ash green while the
MC200Air establishes a connection. When the
connection process is complete the AIR button lights
solid green.
http:; /192.168.1.12
Warring Incorrect parameters mav cause undesired
beha,ror. TQ save the new settings, click. Ok.
~·····
If you decide later that you want to rename your MC200Air, repeat the above steps 1-4 and 8, without selecting
a Wi-Fi network.
Option 3 -System Setup Using an Ethernet Cable
Note: This process can take 10-15 minutes.
1 Disconnect the power cord from the back of the MC200Air for about 7 0 seconds. Turn off the i nterna I Wi-Fi
system
of your computer, if this is how it is normally connected to the internet.
2 Connect an Ethernet cable between the Ethernet port of the MC200Air and the Ethernet port on your
computer.
3 Reconnect the power cord to the MC200Air. Press the 0 button.
10