Owner`s manual


Getting Started Connections Setup Playback Remote Control Information Troubleshooting
ENGLISH
SpecificationsConnections
"6%*0
"6%*0
3-
065065
$0"9*"-
R
L
R
L
CD Player
Select the terminal to use and connect the device.
CD player
When using an optical cable for the digital audio connection, make
the settings at “System Setup” – “Input Setup” – “Digital In
Assign” (vpage 24).
iPod
®
"4%/8
R
L
R
L
iPod
• With the default settings, the iPod can be used connected to the
VCR (iPod) connector.
• To assign the iPod to a connector other than VCR (iPod), make
the settings at “System Setup” – “Input Setup” – “iPod Assign”
(vpage 24).
Use a DENON control dock for iPod (ASD-1R, ASD-3N or ASD-3W,
sold separately) to connect the iPod to the AVR-589. For instructions
on the control dock for iPod settings, refer to the control dock for
iPod’s operating instructions.
NOTE
Video/S-Video or Component Video connections are required
to playback iPod Video or Photos on TV monitor.
47*%&0
065
"6%*0 7*%&0
$0.10/&/57*%&0
: 1# 13
7*%&0
065065
"6%*0
3-
065 065
)%.*
015*$"-
065
R
L
R
L
TV/CABLE Tuner
Select the terminal to use and connect the device.
TV tuner
When using a coaxial cable for the digital audio connection, make the settings
at “System Setup” – “Input Setup” – “Digital In Assign” (vpage 24).
NOTE
The audio signal input to the HDMI input connector cannot be
played on the AVR-589. Input the audio signal to the digital audio input
connector or analog audio input connector.
NOTE
Because video signals are output from the AVR-589’s monitor output terminal
in the same format as the video input signals, the monitor output terminal
should be of the same type as the terminal used for input.