User's Manual

Specifi cations and Technical Data
Implantable Pulse Generator
90655621-03 Rev A 3 of 11
Specifi cations and Technical Data
Parameter Range Default
Areas (Channels) 4 —
Amplitude 0 – 25.5 mA 0 mA
Rate 2 – 1200 pps
a
40 pps
Width 20 – 1000 sec
b
210 sec
Cycle 0.1 – 90 min, OFF OFF
Ramp ON 1 – 10 secs 3 secs
Contacts 1 – 32, case: +100% to -100%, OFF 1 – 32, case: OFF
a. Only one Area is available if the rate is 130 pps.
b. Amplitude × Width  12.7 C.
Materials
Case Titanium
Header Epoxy
Strain Relief Silicone
Size/Volume 55.0 mm x 46.0 mm x 10.8 mm / 21.2 cm
3
(including header)
Radiopaque Identifi cation Tag
The IPG contains a radiopaque identifi cation tag “BSC IPG”. The identifi cation tag is visible
using standard x-ray procedures.
Registration Information
In accordance with international practice and regulatory legislation in some countries, a
registration form is packed with each Boston Scientifi c neurostimulator. The purpose of this
form is to maintain traceability of all products and to secure warranty rights. It also allows the
institution involved in the evaluation or replacement of a specifi c device to gain quick access to
pertinent data from the manufacturer.
Fill out the registration form included in the package contents. Return one copy to Boston
Scientifi c, keep one copy for patient records, provide one copy to the patient, and one copy to
the physician.
Boston Scientifi c Neuromodulation
25155 Rye Canyon Loop
Valencia, California 91355
Attention: Customer Service Department