Owner`s manual

6
E
N
G
L
I
S
H
Using i-DS
3 plus
Getting Started
Once your i-DS
3 plus
is set up and plugged in, turn on the power switches on the back of the main speaker
7
and the
subwoofer
w
. Turn the subwoofer volume control
=
up about half way. (You may want to adjust this later, but use this
setting to start.)
i-DS
3 plus
Controls
WhenyouriPhone/iPodisdockedinthei-DS
3 plus
.Usethe“+/–”buttonstoadjustthevolume.TheiPhone/iPodnavigation
controls
>
,
,
,
{
and
}
work as they usually do.
+/– Increases or decrease the volume level.
On/O Button – The button is lit when the
i-DS
3 plus
is on. The button blinks when the
sound is muted.
Wide Stereo Button – Activates the Wide
Stereo effect. The button is lit when the
effect is active .
About the Remote Control
Turns the i-DS
3 plus
on or returns it to standby mode.
 Startsplay,orpausesplay,ofyouriPhone/iPod.
Press to increase sound volume. Press and hold for faster adjustment.
Press to decrease sound volume. Press and hold for faster adjustment.
Press to mute, or un-mute the sound. When the sound is muted the light on the main
power button blinks.
Press once to skip to the next track. Press and hold to scan forward within a track.
Press once to return to the beginning of the current track. Press twice to skip to the
beginning of the previous track. Press and hold to scan backward within a track.
Turns the video output on or off.
Turns the repeat track feature on or off.
Turns the shuffle track feature on or off.
Turns the wide stereo feature on or off. When wide stereo is active, the button on the main speaker is lit.
Note: When you unpack your remote control there will be a plastic insulation tab extending from the battery
compartment. Pull out this tab before using the remote control.