User's Manual

WASP™ NEST2 Smart Receiver and Gateway Operations Manual
- 16 -
3.2.2.10 Adjust Brightness
The adjust brightness option allows you to change
the brightness of the screen to improve the
readability of the screen under different lightning
conditions. *Note: the higher level of brightness will
increase the current consumption.
You can adjust and set the screen brightness by
choosing ADJUST BRIGHTNESS from the SYSTEM
SETTINGS menu. In the ADJUST BRIGHTNESS
screen use the UP/DOWN arrows to change the
brightness level and tap DONE to save the level.
3.2.2.11 Reset System Settings
The reset system settings option allows you to
restore the receiver to its default setting.
You can restore the receiver default setting by
choosing RESET SYS SETTINGS from the
SYSTEM SETTINGS menu. Once in the RESET
SYS SETTINGS screen tap on OK to authorize the
system setting reset.
3
3
.
.
2
2
.
.
3
3
L
L
O
O
G
G
S
S
The BossPac NEST System has extensive logging
capabilities. To access the LOG screen select LOGS
from the MAIN MENU screen. This brings up the main
LOG screen with 3 available options: UPLOAD
LOGS, VIEW LOGS, and CLEAR LOGS.
Highlight the desired action, (VIEW, UPLOAD, or
CLEAR), and tap SELECT.
Upon UPLOAD action, the receiver sends records of specific type of log over the RS485 port to
an external device.
Upon VIEW action, the receiver displays records of specific type of log which were recorded in
the internal non-volatile memory.
Upon CLEAR action, the receiver erases records of specific type of log from its internal non-
volatile memory.
ADJUST BRIGHTNESS
21'C CRI=4 WRN=1 13:46 DEC 10/10
BRIGHTNESS
LEVEL
7
DONE
CANCEL
BACK
RESET
SYSTEM SETTINGS
RESET SYSTEM SETTINGS
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
OK