User's Manual

WASP™ NEST2 Smart Receiver and Gateway Operations Manual
- 15 -
3.2.2.5 Set Temperature Unit
You can set the units of temperature to either Celsius
or Fahrenheit by selecting SET THERM UNITS from
the SYSTEM SETTINGS menu. Simply choose the
unit of measurement and press SELECT.
3.2.2.6 Set Velocity Units
You can set the units of velocity to either mm/s or IPS
(inch-per-second) by selecting SET VEL UNITS from
the SYSTEM SETTINGS menu. Simply choose the
unit of measurement and press SELECT.
3.2.2.7 Set Pressure Units
You can set the units of pressure to either BAR or PSI by selecting SET PRESS UNITS from
the SYSTEM SETTINGS menu. Simply choose the unit of measurement and press SELECT.
3.2.2.8 Set Level Units
You can set the units to either METERS or FEET by selecting SET LEVEL UNITS from the
SYSTEM SETTINGS menu. Simply choose the unit of measurement and press SELECT.
3.2.2.9 Clearing All Sensors
You can clear all sensors from the NEST’s memory
by choosing CLEAR SENSORS from the System
menu. Once in the SENSOR SETTINGS> CLEAR
ALL screen tap OK to clear the sensors or CANCEL
to go back to the System screen.
WARNING – CLEARING ALL SENSORS WILL REMOVE THE SENSORS AND ALL SETTINGS FROM
THE NEST’S MEMORY. BE SURE THIS IS WHAT YOU INTEND TO DO BEFORE CLICKING “OK”
MISE EN GARDE – “CLEAR ALL” DЀGAGE LA LISTE DE CAPTEUR ET TOUT LEUR
PARAMЀTRAGE. SOYEZ SURE AVANT DE CLIQUER “OK”
MM/S
IPS
VELOCITY UNITS
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
BACK
SELECT
MM/S
CELSIUS
FAHRENHEIT
TEMPERATURE UNITS
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
BACK
SELECT
CELSIUS
CLEAR
SENSOR SETTINGS
SENSOR SETTINGS> CLEAR ALL
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
OK