User's Manual

WASP™ NEST2 Smart Receiver and Gateway Operations Manual
- 13 -
3
3
.
.
2
2
.
.
2
2
S
S
y
y
s
s
t
t
e
e
m
m
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
To input or modify settings you will need to access the
SYSTEM SETTINGS from the MAIN MENU screen.
Use the UP/DOWN arrows to highlight the SYSTEM
SETTINGS option and tap SELECT. The SYSTEM
SETTINGS screen will be displayed with several
options that can be configured or modified.
3.2.2.1 Log Data Out Direct
The SET LOG OPTION allows you to either log bound
sensor data on the internal non-volatile memory,
externally, or stream live data over RS485 port to an
external device. The stream live data option is for use
with the optional data logger or the accompanied
NEST software on a personal computer.
Set the log data out direct option by choosing SET
LOG OPTION from the SYSTEM SETTINGS menu.
> MAIN MENU > SYSTEM SETTINGS > SET LOG OPTION
Once in the LOG DATA OUT DIRECT screen simply choose LOG TO INTERNAL, LOG TO
EXTERNAL, or STREAM TO RS485 and tap on SELECT.
3.2.2.2 Set Time/Date
To set the time and date on the NEST select the SET
TIME/DATE option from the SYSTEM SETTINGS
screen. Set the time using the UP / DOWN arrows to
change the numeric value of the hour character. Use
the LEFT / RIGHT arrows to move the cursor to the
minute character position. Once the time has been
entered, tap SET DATE and use the arrows to input
the correct date. Once both the time and date have
been entered, choose DONE to save new time and
date and return to the SYSTEM SETTINGS screen.
3.2.2.3 Set Password
You can setup a system password by selecting SET
PASSWORD from the SYSTEM SETTINGS menu.
Once in the SET/CHANGE PASSWORD screen
choose a 4-digit password by using the up/down and
right/left arrows. Click SAVE to save the new
password.
SET DATE
21'C CRI=4 WRN=1 13:46 NOV 24/10
BACK
DONE24/NOV/10
SET/CHANGE PASSWORD
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
BACK
SAVE
0000
NEW PASSWORD