Installation guide

Setting up Playmaker - iOS device 6
iOS device
For iOS devices, use the Bang & Olufsen app BeoSetup to change the product name, update the software and check/set up the network
connection. The iOS device must be on the same network as the Playmaker!
> Download and install the BeoSetup app from App Store (click or scan the QR code to be linked directly there).
LAN setup
> Connect the mains cable from the product to the mains supply and wait for the product
to connect to the network (approximately one minute - the network indicator becomes
solid white).
> Start the app BeoSetup. The application will now locate and show a list of Bang &
Olufsens products connected to the network.
> Select the product - the product name is shown as Playmaker_xxxxxxxx ('x' = serial
number).
If the product list is empty, it means that the Playmaker was not assigned an IP address
THENETWORKINDICATORmASHESORANGE)NTHISCASECONTINUETO3TATIC)0ADDRESS
Now the setup page for the product is shown (illustrated to the right):
,@MT@KBNMÖFTQ@SHNM
Static IP address (DHCP disabled) ...
(ESGDQNTSDQHRBNMÖFTQDCVHSG#'"/CHR@AKDCSGD/K@XL@JDQLTRSADRDSTOVHSG@RS@SHB(/@CCQDRR
> Choose SHOW ADVANCED SETTINGS
to open the section for manual IP settings (illustrated to the right).
> Remove the checkmark for Use DHCPSGDÖDKCRENQL@MT@K(/RDSSHMFRADBNLDR@BSHUD
 %HKKHMSGDÖDKCRENQ(/RDSSHMFRL@QJDCVHSG
*
@BBNQCHMFSNSGDQNTSDQBNMÖFTQ@SHNM
> If a proxy server is needed, checkmark Use proxy server @MCÖKKHMSGDÖDKCR
*
.
> Press the APPLY CHANGES button to save settings.
WLAN setup
See next page.