Installation guide

Final setup 11
Output level settings (optional)
It is possible to determine the output level for Playmaker, four maximum volume levels and a jVCB volume level.
Maximum volume level
The volume range goes from 00-90 in steps of 2 (not visible to the user). There are four maximum levels, 55 / 70 / 78 (default) and 90 (only recommended to
be used for large speakers, e.g. BeoLab 5). To set the maximum volume level, follow the procedure below:
Fixed volume level
(SHRONRRHAKDSNRDSSGDUNKTLDENQ/K@XL@JDQSN@ÖWDCKDUDKUNK4RDSGHRRDSSHMFVGDM/K@XL@JDQHRBNMMDBSDC@RRNTQBDSN@M@TCHNL@RSDQRDDADKNV
Procedure (Beo4)
> Find A.SETUP in the List and press GO/CENTRE.
> Press t until S.STORE is show in the display, and choose one of the following settings, by pressing digits:
no digit = max vol. 78
5 = max vol. 55
7 = max vol. 70
9 = max vol. 90
0ÖWDCNTSOTSKDUDKDPT@KSN
> Press GO to store settings.
3GD/K@XL@JDQVHKKMNVSTQMNMSGDFQDDMCDUHBD+$#ENQRDBNMC@R@BNMÖQL@SHNMSG@SSGDMDVRDSSHMFG@RADDMRSNQDC
(( ))
(
(
LINE
POWER LINK
Router / switch
LAN