Installation manual

www.Bosscom.com

Setup wizard

When the tuner is turned on initially,

“Setup wizard” is being displayed after

a few seconds.

The Setup Wizard is a guide through the

basic set up of the tuner.

Prior to the initial power up the tuner should be connected to the Bang & Olufsen equipment and

programmed correctly. See the chapter about Option programming.

With the Factory set option:

The tuner will power on, when or is pressed,

on a Bang & Olufsen remote control, pointed directly at the tuner.

Select”YES” by using and confirm by pressing .

Select 12 or 24 hour format and

press .

Select automatic update via DAB or

Network and press .

Select correct time zone and

press .

Decide on automatic daylight saving

change or not and press .

Select the correct WLAN region and

press .

Select the appropriate network SSID

and press .

If the selected network is not encrypted

the tuner automatically connects to the

internet and display: