Brochure

8
Subject to change without notice. Please refer to your local Bossard E-Shop for the current assortment and dimensions.
Other variants upon request.
Technical Support and Testing
Whether a certain type of thread-forming screw
is suitable for a given malleable material (steel,
aluminum or non-ferrous metal) should be tested
and evaluated through application testing.
Bossard engineers carry out application testing to
assess thread forming screws, sizes M2.5 to M8,
for specifi c customer applications. Findings and
recommendations are then documented in a test
report; the test reports typically include clear guide-
lines in terms of driving and tightening torques,
pilot hole geometry, hole diameter and engagement
length.