Specifications

12/16/2002
3
Product Safety Precautions
x Never operate the COMMAND LIGHT SHADOW near overhead high
voltage power lines. The COMMAND LIGHT SHADOW is manufactured
from electrically conductive materials.
x Do not use the COMMAND
LIGHT SHADOW for uses
other than its’ intended
purpose.
x Do not move emergency
vehicle with the light
extended. Visually verify
that the light is completely
nested before moving
vehicle.
x Do not change light position
while people are located
within its’ operating
envelope. There are
numerous pinch points that
can cause serious bodily
injury.
x The COMMAND LIGHT
SHADOW contains an
automatic reset circuit
breaker. Disconnect power
at the generator distribution
panel before servicing the unit.
x Do not use a high-pressure washer or subject the light to high volumes of
water when cleaning.
x Never use the COMMAND LIGHT SHADOW as a lifting device or mobile
arm.
x Do not use a COMMAND LIGHT SHADOW that has been damaged or is
not fully functional.
x Never hold any part of the COMMAND LIGHT SHADOW with a hand or
foot while it is in motion.
x The COMMAND LIGHT SHADOW has numerous pinch points. Keep
loose clothing, hands and feet clear of moving parts.
x The COMMAND LIGHT SHADOW is not intended to be operated in a
raised position while the vehicle is in motion.