User Manual

17
Using a Computer to Edit/Back up Patches
By connecting the MS-3 to a computer via USB,
using the dedicated software allows you to do the
following:
5 Edit patch settings
5 Name patches
5 Organize patches in order and switch them
around
5 Back up patches and system settings, and
return to the backed up settings
5 Display the “Parameter Guide,” “Application
Guide,” and “MIDI Implementation” (PDF le)
on your computer
* Use a commercially available USB 2.0 cable to
make this connection.
Installing the USB Driver
You must install the USB driver before
connecting to a computer.
Please download the USB driver from the BOSS
website.
Install this special driver before making a USB
connection.
For further details, refer to the Readme.htm le
that comes with the download.
& https://www.boss.info/support/
The program you need to use, and the steps you
need to take to install the USB driver will dier
depending on your computer setup, so please
carefully read and refer to the Readme.htm le
that comes with the download.
Installing the Dedicated Software
You can easily download dedicated software from
the BOSS website.
& https://www.boss.info/support/
For details on how to use the software, refer to the
Readme.htm le that comes with the download.