User manual
Table Of Contents
- Getting Ready to Use EDITOR
- Editing a Patch
- Saving an Edited Effect to the MS-3 (WRITE)
- Listing the Effect Settings
- Controller Settings and PATCH CHANGE MIDI Settings
- Saving All MS-3 User Patches to EDITOR (Backup)
- Restoring Backed-Up Liveset to the MS-3
- Saving a Liveset to a Computer (Export)
- Importing a Liveset from a Computer into a Library (Import)
- Creating an Original Liveset
- Editing a Liveset
- Deleting a Liveset
- Selecting the Device Controlled by EDITOR
Using MS-3 Editor/Librarian
6
Restoring Backed-Up Liveset to the MS-3
Here’s how a liveset that you saved as a backup can be restored to the
MS-3’s user patch.
1. Click the liveset that you want to restore.
2. At the top of the EDITOR screen, click the [Apply Liveset]
button.
The “Apply Liveset” dialog box appears.
3. Click the [OK] button.
The selected liveset is written back into the MS-3.
Restoring a Patch to the MS-3
Here’s how to select a patch from a liveset that you saved as a backup, and
restore it back to the MS-3.
1. Drag and drop the patch that you want to restore onto the
desired patch number of the MS-3.
NOTE
When you drop a patch, it overwrites the patch of the selected
number; the original settings cannot be recovered. Select a patch
that you don’t mind overwriting.
In this example, drag and drop the patch “01 NATURAL CLEAN” onto
“01-3 SLAPBACK ECHO.”
On the MS-3, select user patch “01-3” and you’ll be able to use the
restored patch.
MEMO
You can also select multiple patches as described in “Selecting
multiple patches” (p. 9).