User manual

Using MS-3 Editor/Librarian
3
4. Edit the eect.
MEMO
5 If you want to change the type of MOD1, click the [
I
] button located
at the right of the amp name.
5 You can also change the placement of the various eect types in the
eect chain screen. Drag and drop the eect that you want to move.
(You can move it to the location shown in red.)
5. If you want to edit another eect, repeat steps 3–4.
Saving an Edited Eect to the MS-3 (WRITE)
Here’s how to save the edited eect to the MS-3.
1. In the upper right of the EDITOR screen, click the [WRITE]
button.
The “Please select the save-destination” dialog box appears.
2. Select the save-destination user patch number.
In this example, select “01-2.”
NOTE
When you save, the user patch of the selected number is overwritten;
the original settings cannot be recovered. Select a user patch that
you don’t mind overwriting.
3. If you want to change the name of the user patch, click the
user patch name eld. A cursor appears, and you can use
your computer keyboard to enter a user patch name.