REMOTE CONTROL OPERATION 1. Power On/Off 12 5 2. Mute Button 3. TA Button 1 4. SEL/MENU Button 2 4 MUTE 8 5&6. VOL UP/DOWN Button 9 7. MO/ST Button Press the MO/ST to select stereo or mono sound mode under FM radio reception. 14 10 11 SELECT CLOCK AP - AF 7 MODE BAND PTY TA 3 INT RPT 2 3 5 6 15 17 16 8. A.P Button Press the A.P button to preview the current 19 preset stations.(18stations in FM ) Press and hold the AP button to activate the auto storage 20 function.
WIRING LOCATION AND FUNCTION OF CONTROLS RCA OUTPUT WHITE RED RCA OUTPUT ISO SOCKET CONNECTOR A 1. 2. 3. 4. Memory +12V 5. Auto Antenna Output 6. 7. 12V (To Ignition Key) 8. GROUND SPECIFICATION GENERAL Supply Voltage Current Consumption Power Output Number of channels Unit Dimensions FM SECTION Frequency range Effective sensitivity I.F Frequency AM SECTION Frequency range Effective sensitivity I.
b) During disc, USB playback mode: Press the >>| button briefly to play next track. Press the |<< button briefly to play the current track from the beginning of it if the playing time is more than 2 seconds. Press the |<< button briefly to play the previous track if the playing time is less than 2 seconds. Press the >>| or |<< button and hold to skip forwards or backwards, release to resume normal playback. 8.
20.SD CARD SLOT When you need to play the file in the SD card ,insert the SD card into the SD card slot ,the system will change into the SD mode automatically, and then play the first file in the SD. Note: When SD card and USB stick are both inserted into their slot or socket , the system will change into the playback mode of the latter one. INSTALLATION METHOD This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE.
) MASK DPI/MASK ALL: MASK DPI mode: masks only the AF which has different PI. MASK ALL mode: masks the AF which has different PI and NO RDS signal with high field strength. 7)BEEP ON/BEEP OFF BEEP ON mode: The beep is generated when any key is pressed. BEEP OFF mode: The beep sound is disabled. 8) VOL LAST/VOL DEFA VOL LAST: The radio switches on at the actual volume it had when it was last switched off. VOL DEFA: After pressing SEL button, AVOL will be displayed.
