Congratulations on your purchase of a 3 3 s Audio Systems Compact Disc Receiver. This product has been designed and 1 built to deliver the highest quality audio reproduction. We arek { sure you'll enjoy listening to your favorite music with this' 3 3 component ~ as part of your car audio system. for best results please consult a professional mobile electronics installer for application advice or troubleshooting.
, - :*..
OPERATION STATWN STORING BANDSELECTION At tunw mode, press BAND button (18) s k d y to select the d e s i d band. The receptbn band will change In the following order: PressanyaneofthepresetbuttMls (14) (MI to Mf 0) 0.e. 19-28) to select astationwhich hadhstoredinthe rnemwy. PWB thls button for several seconds, c u m t station is stored into the n u m b t3utton.
current d i in random. h.ess k for several seconds again to cancel the function. SELECTTRACKS Pregs << buttm (16) or >Z tutton (17) to mwe to the previous track or the following track. T W number shows on display. PROQRAMCDTRACKS Use P m g m functlon to s e l e up to 32trackstowtnanywrler. Rogaam W ~ < < ~ ( 1 6 ) w > ~ b u t t owwks n by allowfng you to selact a track number for mch spot in the playing sequence. A CD must be insert and in (17) to fast revem or fast forward.
and "CLR" appears on the display. - If you don't pres MEM button (20) ta carry out program setting, then press PGM button (21) for several seconds, 'NO-P" will a m . TRACWME DISPLAY Press AS/PS M E ) button (2) to show running tlmdremain time of track. I I When WECTthe front panel is sliding down, CDC CHANGER OPERATION SELECTTRACKS Press << button (16)or >> button (1 7) to move to the predous track or the following track. Track number shows on display.
, GENERAL Power Supply Rqulrements GhassisWmensim Weight ToneControls - Bass (at t OO k) - Trebk(atl0Ktlz) Maximum Power Output Current Consumption : DC 12 Volts, Negative Ground : 178(W)x178@)x50(H) : 7*~7.7"x1.9~ : 2Kg : 4.4 1b : f 10dB : f 10dB : 50 Watts X 4 Channels : 15 Am* (max.) CD PLAYER Sinai to Noise Ratio Channel !hpamhn frequency Response : Mwethan55dB : Morethm50dB : MHz-18KHz sensitivity (SM = 30 dB) stereo S p r a t l ~ n Fu : 87.5 to 107.9 MHz : 10.
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. No power. Solution Cause sVmPbm The ignition switch is not on. ' Disc cannot be loaded or ejected. If the power supply is properly connected to the accessmy circuits, but the engine is not moving, switch the ignition key to "ACC". The fuse is blown. Replace the fuse.
