Specifications

- 28 -
BOSS Inverter Mig 165、200 Operating Manual
52 4ZK76ZY01 WIRE DRIVE 1 1
53 4EER400112 TRANSFORMER CONTROL BOD300 1 1
54 4WTH1A2W5K POTENTIONMETER 2W 5K 2 2
55 4WTH1A2W100K POTENTIONMETER 2W 100K 1 1
56 4KNX202 SWITCH KNX202 2 2
57 481CC3KV103 CAPACITOR 3KV103 (Inside) 1 1
58 2BGER90620 EURO CONNECTOR 1 1
59 4WP143102A RECEPTACLE 14 PIN 1 1
60 4RX27D20W0R47H RESISTOR 20W 0.47 OHM 1 1
61 8HPVC5X8BK001 GAS HOSE 5*8 0.82M 0.82M
62 4RX27D50W500H RESISTOR 50W 500 OHM 1 1
63 2FPPT8040030Y PANEL TOP 1 1
64 2FPPT6170014Y PANEL LEFT SIDE UPPER 1 1
65 2FPPT8048017Y PANEL LEFT SIDE LOWER 1 1
66 4HDL00004 HANDLE 1 1
67 2PST8634002 LATCH SLIDE 2 2
68 2LAW8805000 LABEL WARNING 1 1
69 2LAS8809040 LABEL BOSS 2 2
70 BRACKET,MOUNTING (8.604.059) (Inside) 1 1
Table 12
9.0 REMARK
9.1 Welding machines rear panels meet the plume to have good to turn on the earth
grounding, by guarantees the welder safety. When welder operation, should wear
protects the mirror, the glove, puts on protects the clothing.
9.2 When the electrical network voltage is higher than 240V/260V, the out-put will appear the
class, the overload, the welding machine automatically has stopped outputting and giving
the red candle demonstration warning.
9.3 Ambient temperatures high when big electric current long time continuous working, the
welding machine has stopped because of the heat outputting, gets down until the
temperature drop only then restores.
9.4 When welding machines do not use temporarily, its depository should maintain dryly,
cleanly. The environment relative humidity is not bigger than 85%.
9.5 Storing ambient temperature is -25 ~ +55 .℃ ℃
9.6 When long-time does not use, every two months should electrify a time, a humidity month
of every two week should electrify use a time, by use own thermal row of tide.