Specifications

- 13 -
BOSS Inverter Mig 165、200 Operating Manual
3.02 INVERTER MIG Series Control Methods
Weld Control MIG/MAG Description
2T Mode
Yes 2T mode MIG
4T Mode
Yes 4T mode MIG
Spot mode
No Spot mode MIG
Table 6 Inverter Mig series selection of weld technology in different weld methods
3.03 Weld parameter description
Figure 4 Inverter Mig series front panel with parameter description
Parameter Description
Welding Current This parameter sets the welding current.
Burnback Time
MIG only. Burnback time is the difference between the wire feed motor stopping and
switching off of the welding current. The Burnback time allows the electrode wire to
burn out of the molten metal weld pool, to separate the electrode wire from work piece.
Table 7 Weld parameter description for Inverter Mig series