User Manual

4
Panel Descriptions
Top Panel / Side Panels
SD CARD slot
Insert an SD card.
EXP PEDAL/CTL 1, 2 jack
Connect a footswitch (sold
separately) or expression pedal
(sold separately) (p. 30).
Security slot ( )
http://www.kensington.com/
PHONES jack
Connect headphones
(sold separately).
LINE OUT jacks
Connect external
speakers.
USB COMPUTER port
Connect the JS-10 to
a PC with a USB cable
(p. 13, p. 27).
USB MEMORY port
Connect a USB ash
drive (sold separately).
USB cap holders
Place caps detached from the USB
MEMORY port or USB COMPUTER
port here.
DC IN jack
Connect the supplied
AC adaptor.
To power outlet
Indicator
AC adaptorPower cord
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* Never insert or remove SD cards or SDHC cards while this unit is turned on. Doing so may corrupt the unit’s data or the data on the SD card or
SDHC card.
* Carefully insert the USB ash drive, SD card, or SDHC card all the way in – until they are rmly in place.
* Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards.
The indicator will light when you plug the AC adaptor into an AC outlet.
Top Screen
This screen is the basic screen that appears when you turn on the power.
AB REPEAT Segment
Indicates the segment to be
played back repeatedly (p. 12).
Song playback time
Displays time of the
song.
Key and Song Name
Displays the key (p. 21) and name (p. 21)
of the currently selected song.
S/P/C Icons
These icons are displayed when the song’s
playback speed or pitch has been changed or
when Center Cancel is used.
S: Playback speed of the song has been changed
P: Pitch of the song has been changed
C: Center Cancel is turned on
Level Meter
Displays total level of the following sounds:
• The song being played now
• Input to INPUT 1 jack, INPUT 2 jack, and USB
COMPUTER port
IN2
Move the cursor here and the patch number and patch name of
the eect for the INPUT 2 (GUITAR/MIC) jack will be displayed.
Input Sensitivity Icons
Displays icons based on the GAIN
settings (p. 23).
Play Mode
Displays the type of
playback (p. 9).
IN1
Displays the eect patch
number and patch name for
INPUT 1 (GUITAR/MIC) jack.
Song playback location
Displays the current
location within the song.
The explanations in this manual include illustrations that depict what should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the
display may not always match what appears in the manual.