User Manual

eBand Song List Editor Convenient Functions Appendices
Panel Descriptions Play the Guitar with Songs
as Your Backing
NlPtEsItFrDeEnglish
35
Appendices
DELAY
This eect adds delayed sound to the direct sound, giving more
body to the sound or creating special eects.
Parameter/
Range
Explanation
ON/OFF
OFF, ON Turns the DELAY eect on/o.
DELAY TIME
1ms–1000ms (*) This determines the delay time.
FEEDBACK
0–100
This sets the amount of delay sound returned to the
input.
A higher value will increase the number of the delay
repeats.
HIGH CUT (High Cut Filter)
630Hz–12.5kHz,
FLAT
This sets the frequency at which the high cut lter
begins to take eect. When “FLAT” is selected, the high
cut lter will have no eect.
EFFECT LEVEL
0–120 Adjusts the volume of the delay sound.
REVERB
This eect adds reverberation to the sound.
Parameter/
Range
Explanation
ON/OFF
OFF, ON Turns the REVERB eect on/o.
TYPE
This selects the reverb type. Various dierent simulations of space are
oered.
AMBI.
(AMBIENCE)
Simulates an ambience mic (o-mic, placed at a
distance from the sound source) used in recording
and other applications. Rather than emphasizing the
reverberation, this reverb is used to produce a sense of
openness and depth.
ROOM
Simulates the reverberation in a small room. Provides
warm reverberations.
HALL
Simulates the reverberation in a concert hall. Provides
clear and spacious reverberations.
PLATE
Simulates plate reverberation (a reverb unit that uses
the vibration of a metallic plate). Provides a metallic
sound with a distinct upper range.
REV TIME (Reverb Time)
0.1 s–10.0 s Adjusts the length (time) of reverberation.
HIGH CUT (High Cut Filter)
630Hz–12.5kHz,
FLAT
This sets the frequency at which the high cut lter
begins to take eect. When “FLAT” is selected, the high
cut lter will have no eect.
EFFECT LEVEL
0–100 Adjusts the volume of the reverb sound.
EZ CHAR
Parameter/
Range
Explanation
EZ CHAR (EZ Character)
-20–+20
Increasing the value makes the tone suitable for solos
and decreasing it makes the tone suitable for backing.
WAH
You can control the wah eect in real time by stepping on the
expression pedal connected to the EXP PEDAL/CTL 1, 2 jack.
MEMO
WAH can be used in eects for the INPUT 1 jack.
Parameter/
Range
Explanation
ON/OFF
OFF, ON Turns the WAH eect on/o.
Setting parameters with Tap Tempo
The values for the parameters marked with an asterisk (*)
can be set so they match the timing you use when pressing
the [SPEED] button (Tap Tempo).
Tap the [SPEED] button two or more times in succession to
specify a tempo for the parameter.