User Manual

34
Appendices
FLANGER
The anging eect gives a twisting, jet-airplane-like character to
the sound.
Parameter/
Range
Explanation
RATE
0–100 (*) This sets the rate of the anging eect.
DEPTH
0–100 Determines the depth of the anging eect.
RESONANCE
0–100
Determines the amount of resonance (feedback).
Increasing the value will emphasize the eect, creating
a more unusual sound.
MANUAL
0–100
Adjusts the center frequency at which to apply the
eect.
CHORUS
In this eect, a slightly detuned sound is added to the original
sound to add depth and breadth.
Parameter/
Range
Explanation
MODE
Selection for the chorus mode.
MONO
This chorus eect outputs the same sound from both L
channel and R channel.
ST1
This is a stereo chorus eect that adds dierent chorus
sounds to L channel and R channel.
ST2
This stereo chorus uses spatial synthesis, with the direct
sound output in the L channel and the eect sound
output in the R channel.
RATE
0–100 (*) Adjusts the rate of the chorus eect.
DEPTH
0–100
Adjusts the depth of the chorus eect.
To use it for doubling eect, set the value to 0.
EFFECT LEVEL
0–100 Adjusts the volume of the eect sound.
TREMOLO
Tremolo is an eect that creates a cyclic change in volume.
Parameter/
Range
Explanation
RATE
0–100 (*) Adjusts the frequency (speed) of the change.
DEPTH
0–100 Adjusts the depth of the eect.
WAVE SHAPE
0–100
Adjusts changes in volume level.
A higher value will steepen wave’s shape.
ROTARY
This produces an eect like the sound of a rotary speaker.
Parameter/
Range
Explanation
RATE
0–100 (*) Adjust the rotation speed.
UNI-V (Uni-Vibe)
This models a Uni-Vibe.
Although this resembles a phaser eect, it also provides a unique
undulation that you can’t get with a regular phaser.
Parameter/
Range
Explanation
RATE
0–100 (*) Adjusts the rate of the UNI-V eect.
DEPTH
0–100 Adjusts the depth of the UNI-V eect.
PAN
With the volume level of the left and right sides alternately
changing, when playing sound in stereo, you can get an eect that
makes the guitar sound appear to y back and forth between the
speakers.
Parameter/
Range
Explanation
RATE
0–100 (*) Adjusts the frequency (speed) of the change.
DEPTH
0–100 Adjusts the depth of the eect.
WAVE SHAPE
0–100
Adjusts changes in volume level.
A higher value will steepen wave’s shape.