User Manual

30
Convenient Functions
Using Footswitches and Expression Pedals
You can connect two BOSS FS-5U (sold separately), a BOSS FS-6 (sold separately), or a Roland EV-5, etc. (sold separately) to perform a variety of
operations with your foot.
EXP PEDAL/CTL 1,2 jack
One of these can
be connected.
POLARITY switch
When you connect one FS-5U
When you connect an
EV-5, etc.
When you connect two FS-5Us When you connect an FS-6
Stereo 1/4-inch phone type  Stereo 1/4-inch phone type
Tip of the stereo 1/4-inch phone type
TIP
RING
MODE and POLARITY switches
OR
CTL1 CTL2CTL1 CTL1
OR OR
1/4-inch phone type 
1/4-inch phone type
Stereo 1/4-inch phone type 
1/4-inch phone type
x 2
CTL2
MEMO
• Never connect or disconnect a footswitch or expression pedal while this unit’s power is on.
• Use only the specied expression pedal (Roland EV-5; sold separately). By connecting any other expression pedal, you risk causing malfunction
and/or damage to the unit.
Allocating Functions to Footswitches
1. Follow this sequence of steps: [MENU] button  “SYSTEM”
 [ENTER] button  “PEDAL”  [ENTER] button.
Set a function to CTL 1 or CTL 2.
CTL 1 / CTL 2 Explanation
PLAY/STOP Operate the player (Play/Stop).
REC/STOP Operate the recorder (Rec/Stop).
IN1 PATCH +1
Switch the eect patch number for INPUT 1 (GUITAR/
MIC) jack (+1).
IN1 PATCH -1
Switch the eect patch number for INPUT 1 (GUITAR/
MIC) jack (-1).
IN2 PATCH +1
Switch the eect patch number for INPUT 2 (GUITAR/
MIC) jack (+1).
IN2 PATCH -1
Switch the eect patch number for INPUT 2 (GUITAR/
MIC) jack (-1).
Functions you can control with expression
pedals
The function of the expression pedal (sold separately) changes
depending on whether the WAH eect for INPUT 1 is ON or OFF.
MEMO
Controls from the expression pedal work on the sound input to
the INPUT 1 jack.
WAH eect (p. 35 ) Expression pedal’s function
ON Operates as wah pedal for INPUT 1.
OFF Operates as volume pedal for INPUT 1.