User Manual

eBand Song List Editor Convenient Functions Appendices

Panel Descriptions Play the Guitar with Songs

as Your Backing

NlPtEsItFrDeEnglish

Convenient Functions

About the SD card write protect function (LOCK)

The contents of the SD card can be

protected by write protecting it. To write

protect a card, slide the write protect

switch on the side of the SD card to

the “LOCK” position. To use the JS-10

functions, release the LOCK.

Initializing an SD card (FORMAT)

This procedure lets use the commercially available SD cards in the

JS-10.

NOTE

• The supplied SD card cannot be initialized (formatted) using the

JS-10, to protect its content. If you initialize the supplied SD card

with your PC, songs, USB drivers, and eBand Song List Editor on

the card will all be lost. Song protection settings will be ignored.

• Since there is no way to recover data after initialization, be sure

to back up any important data before initializing the card (p. 20).

1. Follow this sequence of steps: [MENU] button 

“SYSTEM”  [ENTER] button  “SD CARD FORMAT” 

[ENTER] button.

The SD CARD FORMAT screen appears.

2. Press the [ENTER] button.

The message “Are you sure?” appears.

3. To initialize the SD card, follow this sequence of steps:

“OK”  [ENTER] button.

The SD card will be initialized.

MEMO

Follow the procedure below to copy data from one SD card to

another freshly initialized SD card.

3-1. Back up the rst SD card (p. 20).

3-2. Restore the backed up data to the new SD card

(p. 20).

Write protect switch