User Manual

28
Convenient Functions
Using the Commercially Available SD
Cards
In addition to the supplied SD card, you can also use commercially
available SD cards.
Specications for SD cards usable with the
JS-10
The JS-10 supports SD cards meeting the following specications.
• Capacity: 1–32 GB
• SD/SDHC standard
SD cards veried to work with the JS-10
Information on SD cards conrmed to work with the JS-10 can be
found on the Roland website.
http://www.roland.com/support/
MEMO
• The JS-10 supports SDHC cards.
• Some SD card types or SD cards from some manufacturers may
not record or play back properly on the JS-10.
SD card capacity and recording time
The following table shows the approximate number of songs that
can be recorded on the JS-10 depending on the capacity of the SD
card.
Size
With eBand
songs
With WAV With MP3
Songs per GB
50 songs
(4 hours)
20 songs
(1.5 hours)
200 songs
(17 hours)
32 GB
1,700 songs
(130 hours)
600 songs
(50 hours)
4,000 songs
(550 hours)
MEMO
• Figures in the table above are based on a song length of ve
minutes.
• Songs, USB drivers, and other data are stored on the supplied SD
card. Because of this, the number of songs that can be recorded
on the card is less than the numbers in the table above.
• MP3 songs are calculated as data encoded at a sampling rate of
44.1 kHz and a bit rate of 128 Kbps.
• WAV songs are based on stereo data with a sampling rate of
44.1 kHz and a quantization bit rate of 16 bits.
• The number of songs you can record may vary according to the
songs included.
• Regardless of the amount of free space available, the JS-10 can
only store a maximum of 4,000 songs.
Replacing the SD Card
Here’s how to replace the supplied SD card with a dierent SD card.
NOTE
Never insert or remove an SD card or SDHC card while this unit
is turned on. Doing so may corrupt the unit’s data or the data on
the SD cards or SDHC cards.
1. Press the [POWER] button to turn o the JS-10.
2. Remove the SD CARD slot cover.
SD CARD slot cover
Screw
SD CARD
slot
DC IN jack
3. Push in the SD card and release your nger.
4. Remove the SD card.
5. Insert the new SD card into the JS-10.
SD card
Push inward.
6. Put the SD CARD slot cover back on.