User Manual

eBand Song List Editor Convenient Functions Appendices
Panel Descriptions Play the Guitar with Songs
as Your Backing
NlPtEsItFrDeEnglish
27
Convenient Functions
Using the JS-10 as a USB Audio
Interfaces
You can use the JS-10 to listen to PC sound via USB and also use the
software on your PC to record the JS-10’s sound via USB.
Preparing a USB Driver
Save the USB driver les to your PC.
MEMO
• It is only necessary to install the USB driver on the PC the rst
time the driver is used.
• The USB driver le is included on the supplied SD card. The
latest version of the USB driver can be found on the Roland
website.
http://www.roland.com/support/
• You can install the driver on a Mac computer, but it needs to be
a model with an Intel processor.
• If the latest USB driver le is stored on your PC, proceed to
“Installing the USB Driver” (p. 27).
• The description of computer procedures will use My Computer
(or Computer) with Windows and Finder with the Mac OS.
1. Follow the procedure in “Changing the Function of the
USB COMPUTER Port” (p. 24) and set USB MODE to “eBand
SONG LIST EDITOR.”
2. Connect the PC to the JS-10 with a USB cable.
USB COMPUTER portUSB port
3. Using your PC, locate the folders inside “JS-10 EBAND.”
4. Double-click one of the les shown below.
File Name Supported OS
Win.zip Windows 7, Vista, or XP
Mac.dmg Mac OS
The contents of the le are displayed.
5. Copy a “Drivers” folder to your PC.
MEMO
We recommend that you copy to a folder that will be easy to
locate afterward.
6. Disconnect the JS-10 from the PC.
• For Windows 7
In the lower right of your screen, click the [
] icon  [ ] icon,
and then click “Eject JS-10 EBAND.”
• For Windows Vista/XP
In the lower right of your screen, click the [
] icon ([ ] in XP)
and then click “Safely remove USB Mass Storage Device.”
• For Mac OS
Drag the “JS-10 EBAND” icon to the eject icon in the Dock.
7. Press the JS-10’s [EXIT] button.
The message “Are you sure?” appears.
8. To end the connection, press the [ENTER] button on the
JS-10.
Installing the USB Driver
Installation of the USB driver is done by using the USB driver le
stored in your PC.
1. Disconnect the USB cable from the JS-10.
2. Follow the procedure in “Changing the Function of the
USB COMPUTER Port” (p. 24) and set USB MODE to “AUDIO.”
A folder containing the USB driver will be created.
3. Read the “Readme.htm” le found in the created folder
and install the driver as directed.
Playing Songs on a PC Through the JS-10
You can play songs on a PC and use the JS-10’s speakers to listen to
them.
1. Follow the procedure in “Changing the Function of the
USB COMPUTER Port” (p. 24) and set USB MODE to “AUDIO.”
2. Connect the PC to the JS-10 with a USB cable.
3. Set the JS-10 as the output destination for audio played
back by the PC’s audio playback software.
MEMO
For instructions on how to switch the audio output destination,
refer to the user’s guide for the software you are using.