User Manual

26
Convenient Functions
Enabling Auto O
The JS-10 powers o automatically when there is no performance
or operation for 30 minutes (default factory setting). You can
change how long the JS-10 can remain inactive before it powers o
automatically.
NOTE
The settings will be lost if the power is turned o while editing.
Save the settings in advance to prevent this from happening.
1. On the MENU > SYSTEM screen, follow this sequence of
steps: “SETTING”  [ENTER] button.
Specify the setting for AUTO OFF.
AUTO OFF Explanation
OFF Auto o is disabled.
10MIN, 30MIN,
240MIN
Set how long (in minutes) the JS-10 can remain inactive
before it powers o automatically.
Listing the Files on the SD Card as a Song
List
You can change the setting to display the les saved on the SD card
as a list in the SONG LIST screen.
1. On the MENU > SYSTEM screen, follow this sequence of
steps: “SETTING”  [ENTER] button.
Specify the setting for SD VIEW.
SD VIEW Explanation
OFF This setting is the default factory setting.
ON
“SD CARD” is displayed on the SEARCH screen in SONG
LIST. If you select “SD CARD,” les saved on the SD card
are displayed as a list.
Selecting the Sound Output from the
USB COMPUTER Port
You can choose to output only the sound input from the INPUT 1
(GUITAR/MIC) jack or the INPUT 2 (GUTAR/MIC) jack from the USB
COMPUTER port or to output a mixed sound created by input from
the INPUT 2 (AUX) jack and the USB COMPUTER port (p. 38).
1. On the MENU > SYSTEM screen, follow this sequence of
steps: “SETTING”  [ENTER] button.
Specify the setting for USB AUDIO OUT.
USB AUDIO OUT Explanation
INPUT
Outputs sound that is input to the INPUT 1 (GUITAR/
MIC) jack or the INPUT 2 (GUITAR/MIC) jack only.
ALL
Mixes and outputs all sounds that are input to the
INPUT 1 (GUITAR/MIC) jack, the INPUT 2 (GUITAR/MIC)
jack, the INPUT 2 (AUX) jack, and the USB COMPUTER
port.
Initializing an SD Card (FORMAT)
This procedure lets you the commercially available SD cards in
the JS-10.
Refer to “Initializing an SD card (FORMAT)” (p. 29).
Returning the JS-10’s Settings to Default
Factory Settings
Here’s how to restore the parameters in the JS-10 to their original
default factory settings.
1. On the MENU > SYSTEM screen, follow this sequence of
steps: “FACTORY RESET”  [ENTER] button.
The FACTORY RESET screen appears.
2. Select the parameter (add checkmark) whose settings you
want to restore to the default factory settings.
Specify the range of user
patches to be restored to
their default factory settings.
USER PATCH
Restores the user eect patches to
their default factory settings.
SYSTEM
Restores the system
parameters to their
default factory settings.
ALL
Restores all parameters
to their default factory
settings.
NOTE
If you restore the default factory settings for the selected
parameters, previously saved settings will be lost.
3. Press the [ENTER] button.
The message “Are you sure?” appears.
4. To return to the default factory settings, follow this
sequence of steps: “OK”  [ENTER] button.
The settings will return to the default factory settings.