User Manual

eBand Song List Editor Convenient Functions Appendices
Panel Descriptions Play the Guitar with Songs
as Your Backing
NlPtEsItFrDeEnglish
23
Convenient Functions
Specifying Audio Settings
Here’s how to specify the settings related to the input and output
of audio.
Switching the INPUT Jack Sensitivity
Select the input sensitivity that matches the device connected to
the JS-10’s INPUT 1 and INPUT 2 (GUITAR/MIC) jacks.
1. Follow this sequence of steps: [MENU] button  “AUDIO
SETTING”  [ENTER] button  “INPUT”  [ENTER] button.
The INPUT screen appears.
GAIN
Set the input sensitivity.
GAIN Explanation
Select when a guitar is connected to INPUT jack.
Select when a mic is connected to INPUT jack.
PAN
Set the pan eect
for the input sound
to INPUT jack.
MEMO
The Input Sensitivity icon displayed on the top screen changes
according to the GAIN settings.
Input Sensitivity Icon
* When setting the GAIN to mic, be sure to check that the eect
from the microphone category is selected beforehand.
* Howling (feedback) is produced if you set the GAIN to mic while
a guitar eect is selected.
* Also, if you switch from a factory default song, the guitar eect
may change automatically to the eect set in PATCH SYNC (p. 22)
and produce sudden howling (feedback). If this is the case, set
the PATCH SYNC’s SYNC SW setting to OFF so that the patch is
not allowed to switch.
Adjusting the Balance of Low to High
Frequency Ranges (Global EQ)
Here’s how to apply the equalizer to the overall sound of the JS-10
and adjust its balance.
1. Follow this sequence of steps: [MENU] button  “AUDIO
SETTING”  [ENTER] button  “EQ”  [ENTER] button.
The GLOBAL EQ screen appears.
2. Apply the GAIN setting for each band.
GLOBAL EQ Explanation
LOW GAIN Adjusts the low-end volume.
MID GAIN Adjusts the midrange volume.
HIGH GAIN Adjusts the high-end volume.
MEMO
Press the [ENTER] button in the GLOBAL EQ screen to turn the
equalizer on and o.
Turning O the JS-10 Speakers
You can output audio from the JS-10’s LINE OUT jacks to an external
playback device (e.g., component stereo system). When doing so,
you may want to turn o the JS-10’s internal speakers.
1. Follow this sequence of steps: [MENU] button  “AUDIO
SETTING”  [ENTER] button  “SPEAKER”  [ENTER]
button.
Apply the settings for SPEAKER SW.
SPEAKER SW Explanation
OFF No sound will be produced by the internal speakers.
ON The sound will be produced by the internal speakers.
MEMO
The tone quality of sound output from the OUTPUT jack
changes based on the SPEAKER SW settings. This does not
indicate a malfunction.