User Manual

22
Convenient Functions
Writing Songs to a USB Flash Drive
(Export)
You can export eBand songs saved on an SD card to a USB ash
drive.
1. Connect the USB ash drive to the USB MEMORY port.
2. Select a song in the JS-10.
3. Follow this sequence of steps: [MENU] button  “SONG”
 [ENTER] button  “EXPORT”  [ENTER] button.
The SONG EXPORT screen appears.
MEMO
The “EXPORT” menu is not displayed if the USB ash drive has
not been inserted.
4. Press the [ENTER] button to export the songs.
The song will be written to the USB ash drive.
Importing Songs in the USB Flash
Drive to the JS-10 (Import)
You can import songs in the USB ash drive to the JS-10.
1. Connect the USB ash drive to the USB MEMORY port.
2. Select a song in the USB ash drive.
3. Follow this sequence of steps: [MENU] button  “SONG”
 [ENTER] button  “IMPORT”  [ENTER] button.
The SONG IMPORT screen appears.
MEMO
The “IMPORT” menu is not displayed if a song on the USB ash
drive has not been selected.
4. Press the [ENTER] button.
The song will be saved as USER on the SD card.
MEMO
For details about the memory conguration in the JS-10 or the
data that is saved, refer to “Memory Conguration in the JS-10”
(p. 38).
Changing the Patch When the Song
is Switched (PATCH SYNC)
If a patch number is set for a song in advance, you can call up that
patch number automatically when the song is switched.
MEMO
The PATCH SYNC function cannot be used for songs in the USB
ash drive.
1. Follow this sequence of steps: [MENU] button  “PATCH
SYNC”  [ENTER] button.
The PATCH SYNC screen appears.
2. Apply the settings for PATCH SYNC.
Set the patch number at IN1 for INPUT 1’s eect, and IN2 for INPUT
2’s eect.
IN1/IN2 Explanation
OFF The patch will not change when you switch songs.
P***
Calls up the specied preset patch number when the
song is switched.
U***
Calls up the specied user patch number when the
song is switched.
Disabling the PATCH SYNC function
You can switch the JS-10 PATCH SYNC function ON and OFF. Set it
to OFF if you want the patch number set in PATCH SYNC to always
be ignored.
1. Press the [ENTER] button on the PATCH SYNC screen.
Press the [ENTER] button to alternately switch it ON and OFF.
SYNC SW Explanation
OFF
The PATCH SYNC function is disabled.
The patch number set in PATCH SYNC will be ignored,
and the current eect setting will be used.
ON
The PATCH SYNC function is enabled.
When you switch a song, the patch changes to the
number set in PATCH SYNC.
Setting Current Patch in PATCH SYNC
You can set the patch number of the current eect in PATCH SYNC.
1. Align the cursor with either the IN1 patch number or the
IN2 patch number on the PATCH SYNC screen.
Align the cursor with the eect you want to add to PATCH SYNC.
2. Press the [SPEED] button.
The current patch number is set in PATCH SYNC. The next time
you switch to this song, the patch number set will be called up
automatically.