User Manual

Play the Guitar with Songs as Your Backing
10
Recording Performances
You can record the sounds exactly as you hear them from the JS-10.
1. To record while the song is being played back,
rst press the [ ] (PLAY) button, and then press
the [ ] (REC) button.
The song will be played back and recorded along with
the sounds input to INPUT 1 jack and INPUT 2 jack.
MEMO
In order to record only the sounds input to INPUT 1 jack and
INPUT 2 jack, just press the [
] (REC) button without pressing
the [ ] (PLAY) button (i.e., do not play back the song).
2. Press the [ ] (STOP) button to stop recording.
The REC END popup appears.
3. Decide what to do with the recording.
Icon Explanation
SAVE
The recording is saved in “USER” category in
the song list.
ERASE
The recording is discarded. (The recorded
content will not be saved.)
PREVIEW
(Press the [
] (PLAY) button)
Listen to the recording.
MEMO
Recorded data (songs) are automatically assigned the name
“SONG****: (original song name)” (with **** indicating the
number). However, if the original song name was edited with
eBand Song List Editor, then it will be “SONG****.”
Switching Eects
The internal eects can be switched.
1. Select either IN1 or IN2.
IN2
Eect on INPUT 2 (GUITAR/
MIC) jack
IN1
Eect on INPUT 1 (GUITAR/
MIC) jack
MEMO
The eect will not be applied on AUX jack.
2. Press the [EFFECTS] button.
The PATCH SELECT screen appears.
3. Select a category.
Usage Category
For Guitar
For Bass
For
Microphone
For User
Patch
* When you connect a microphone, select an eect from the
categories for microphones (p. 10). Also, switch the input
sensitivity of the INPUT jack to mic (p. 23).