BHD3F HARLEY DAVIDSON FRONT SYSTEM FITS SELECT 1998+ HARLEY DAVIDSON ROAD GLIDE AND STREET GLIDE MOTORCYCLES 0121
BHD3F Harley Davidson Front System What is included? BHD3F Harley Davidson Front System Congratulations on your purchase of a POWERSPORTS Speaker System. It has been engineered to bring you the highest level of performance. Its quality will afford you years of listening pleasure. The BHD3F is the first of its kind to fit 1998 to present Harley Davidson Road Glide and Street Glide models all in one package.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System GETTING STARTED 1. Protect all painted surfaces. 3. Remove (2) T-27 Torx bolts from outer edges of inner fairing near the fork tubes (facing forward) 4. Remove (3) T-27 Torx bolts from bottom edge of windshield. Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing. 2.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System 2014 – 2020 Street Glide / Batwing models: 1. Cover the front fender. 2. Remove (2) T-27 Torx bolts from inner fairing (under mirrors) 1. Cover the front fender. 2. Remove (2) T-27 Torx bolts from inner fairing (under mirrors) Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing. 5.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System 2. Lift away the fairing, unplug the headlights and remove. 4. Remove the speaker screws and the speaker. (10) (9) (8) (13) (12) (11) 2014 + Street and Road Glide (16) 1. Using 3 of the screws in the provided hardware, mount the speaker adapter to the inner fairing. The 4th inner bottom screw locations are not used on FLH/ batwing models.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System Step 1 - Mounting Plate and Bracket Mounting HD Street Glide 98 – 13 With the front faring removed. Using the Type(4) bracket, align bracket on the bottom side of the mounting plate using the bracket type indicators. On the top edge, you will screw in the two threaded pins into the mounting plate. These are used to align the mounting plate with the rubber bushings on top of the factory radio.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System Step 3 - Amplifier Mounting Step 6 - Rear Speaker Installation Mount amplifier upside down with the supplied screws to the mounting plate. Align the amplifier to the appropriate holes on the plate. With the seat already removed, route the Rear Speaker Harness toward the rear of the motorcycle over the fender along the brake side of the motorcycle.
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System Amplifier and Amp plate Installation 2014 – Newer Road Glide FLTR 2015 – Newer: *NOTE* after installation this vehicles head unit must be flashed to get proper sound from the upgraded system. Please see the following link to find a recommended HD shop that can flash the stock system. https://technoresearch.info/tuning-centers-map/ 1. Remove the radio. Unplug the four connectors on the back of the radio.