Specifications

MIDI I N C HANNEL
This needs to match the MIDI Tx channel set in the GT-. If you get it wrong, then
the GT Edit function won’t work.
You can set GT Manager to accept input on any MIDI channel (Omni mode), in
which case it doesn’t matter what the MIDI In Channel setting is. This is ok if you
don’t have any other devices connected to the MIDI input.
MIDI O UT C HANNEL
This needs to match the MIDI Rx channel set in the GT-. If you get it wrong, then
the Keep selected patch number synchronised function won’t work.
K EEP S ELECTED P ATCH N UMBER S YNCHRONISED
This sets the patch and bank number on the GT- to the same as that selected in
GT Manager. This is useful if you often are just updating one patch, and want to
save it by pressing the Write button on the GT- to save the patch.