Training Guide

BOSS GT-100 Training Guide
How to Customize AMPS
1. Press EZ TONE.
2. Turn KNOB 4 to select AMP CUSTOM.
3. Turn KNOB 5 to select an amp to customize. You can customize seven
different amps.
4. Press PAGE RIGHT to select the AMP CUSTOMIZE 2 screen.
5. Turn KNOB 5 and KNOB 6 to adjust the amp sound.
6. Press EXIT when you are finished.
How to Customize OD/DS Effects
1. Press EZ TONE.
2. Turn KNOB 4 to select OD/DS CUSTOM.
3. Turn KNOB 5 to select an overdrive or distortion to customize. You can
customize eight different OD/DS effects.
4. Press PAGE RIGHT to select the OD/DS CUSTOMIZE 2 screen.
5. Turn KNOB 5 and KNOB 6 to adjust the OD/DS sound.
6. Press EXIT when you are finished.
How to Use the NUMBER PEDALS to Turn On the TUNER
1. Press the SYSTEM button
2. Turn KNOB 4 to select PLAY OPTION.
3. Turn KNOB 8 to select TUNER. When you select this, you can use the
NUMBER PEDAL of whatever patch you are currently using to turn on the
tuner while you are playing. For example: if you are using P02-1, you can
turn the tuner on by pressing NUMBER PEDAL 1. (Pressing a different
NUMBER PEDAL will change sounds, as always.)
How to Reinitialize the GT-100
1. Press the SYSTEM button.
2. Turn KNOB 4 to select FACTORY RESET.
3. Press WRITE twice.