Training Guide

BOSS GT-100 Training Guide
2. QUICK DEMO
The Quick Demo is a way to get a customer interested in a product in less than
60 seconds.
Before You Start
1. Connect the MONO (L) Gt. AMP output of the GT-100 to the clean
channel of a good amp, such as a Roland JC-120 or other pro quality
amp.
NOTE: It is very important to use a pro quality guitar amp. Why run a high-
end effect through a low-end amp?
2. Set the amp’s tone controls for a flat response.
3. Plug a guitar into the GUITAR INPUT of the GT-100.
4. Set the GT-100’s output to match the amp you are using:
a. Press SYSTEM
b. Turn KNOB 4 to select OUTPUT SELECT
c. Turn KNOB 8 to select the correct type of output. If in doubt, set
this to LINE/PHONES.
d. Press EXIT.