FEATURES Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders.
CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 Installation .....................................................................................................6 Using the Detachable Front Panel .............................................................9 Wiring Connection ..................................................
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player Note these scratches are not an indication of any problem with the player. DVD 12 cm disc (Single-sided disc only) Label side up Video CD 12 cm disc CD 12 cm disc Do not touch the underside of the disc MP3 12 cm disc Do not bend Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Wipe the disc from center toward the outside edge Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) Installation Opening This unit can be installed in any dashboard having an opening as shown below: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.
INSTALLATION 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appropriate tabs behind the dashboard to secure the sleeve in place. Spring Washer Hex Nut Metal Strap Mounting Bolt Plain Washer Tapping Screw Dashboard Tabs 10. Reconnect the cable to the vehicle battery's negative (-) terminal.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Mounting Bracket Screw Screw Hook Dashboard or Console To fasten the unit to the factory radio mounting brackets. 1.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL 1. Press the release button on the front panel and pull off the front panel. Precautions when handing 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION (BLACK) AV IN CABLE (OPTIONAL) AUDIO R IN (RED) AUDIO L IN (WHITE) VIDEO IN (YELLOW) (GREY) AV OUT CABLE ANTENNA CONNECTOR VIDEO OUT 1 (YELLOW) VIDEO OUT 2 (YELLOW) DIGITAL AUDIO (ORANGE) FUSE REMOTE CONTROL RECEIVER GREEN FRONT RCA CABLE(BROWN) RED FOR DVD SIGNAL OUTPUT ONLY Rch WHITE Lch REAR RCA CABLE(GREY) RED Rch WHITE Lch SUBWOOFER CABLE (GREEN) PINK BLUE YELLOW VIDEO 2 IN WHITE AUDIO 2 L IN RED AUDIO 2 R IN RED FRONT Lch SPEAKER REAR Lch SPEAKER YELLOW CHOKE BOX BLA
LOCATION AND FUNCTION OF KEYS THE PLAYER 2 15 7 3 1 9 10 11 13 5 19 18 8 20 21 22 14 23 13. BND/MEN 14. 1~6 preset buttons 15. S~M 16. MANU/SKIP 17. MANU/SKIP 18. AMS 19. SEL 20. 21. SCN 22. RPT 23. SHF 1. PWR (power button) 2. TA 3. AF/REG 4. 5. Disc Slot 6. MOD (SW) 7. 8. Liquid Crystal Display ) 9. PTY ( 10. ST/TITL 11. VOLUME knob 12. RX When remove the front panel: 25 24 24. LED 25.
LOCATION AND FUNCTION OF KEYS REMOTE CONTROL 27 24 5 1 3 32 8 2 6 28 4 25 9 10 31 30 7 26 29 12 18 11 15 19 13 23 17 20 16 14 22 21 12
LOCATION AND FUNCTION OF KEYS 1. POWER 2. SMART Press POWER to turn the unit ON or OFF. In DVD mode, press it shortly to enter SMART MODE function. (For details, refer to the following text). 3. A-B A-B repeat allows a passage to be repeated continuously. 4. ANGLE Changing of the view angle on multi-angle DVD disc. 5. Press to play/pause the disc. 6. MODE (SW) Changing between radio mode, disc (DVD/VCD/CD/MP3) play mode and AV IN mode. Press it for several seconds to toggle sub-woofer output.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new battery. Make sure that the positive and negative terminals of the battery are oriented as indicated. 3. Close the cover. Battery: a button cell lithium battery (CR2025 3V) Using the Remote Control Point the remote control towards the player front face remote sensor RX (remote control signal receiver).
OPERATION EQUALIZATION Press AUDIO button on the remote control shortly to turn on equalization function and to select desired audio mode. There are three kinds of mode as below: BASIC OPERATION SWITCHING ON/OFF THE UNIT Press PWR button on the front panel or POWER button on the remote control to turn on the unit. FLAT FACEPLATE RELEASE Press button on the front panel to detach the removable faceplate.
OPERATION RADIO OPERATION STATION STORING Press any one of the preset buttons (1 to 6) on the front panel to select a station, which had been stored in the memory. Press this button for several seconds, current station is stored into the number button. SWITCHING TO RADIO MODE Press MOD on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency.
OPERATION segment is turned on. When a TP station is received, TP of individual segment is turned on. TA interruption function The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off. When pressed long, it is selected EON TA LOCAL/EON TA DISTANCE mode.
OPERATION TP: Traffic Program Identification Identification data for traffic information broadcasting station TA: Traffic Announcement Identification Identification data showing traffic information is being transmitted or not EON: Enhanced Other Networks Information Broadcasting information on PI, AF, TP, TA, etc. relating to networks other than the network used for current reception PTY: Program Type Code Contents of programs such as news, light music, sports etc.
OPERATION PAUSING PLAYING Pressing on the remote control or on the front panel during playback will stop play temporary. To return to normal playback, press once again. ON” on the left-top corner. Then press button to start RANDOM playback. Press SHF button again in stop mode, “SHUFFLE OFF” appears and release the mode.
OPERATION (3) Press DISP for the third time: ON-SCREEN DISPLAY FUNCTION Press the DISP button during playback to display the contents of the current disc on the screen. Example: TOTAL ELAPSED 00:25 FOR DVD: (1) Press DISP for the first time: 01/13 (4) Press DISP for the fourth time: TOTAL REMAIN TITLE 01/03 CHAPTER 002/025 40:35 01/13 00:02:25 (5) Press DISP for the fifth time: The message on the screen will be cleared.
OPERATION TITLE MENU FUNCTION (FOR DVD ONLY) CHAPTER ELASPED 01/18 00:25 If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback. 1. Press ST/TITL button on the front panel of the DVD unit or TITLE button on the remote control during playback. The title menu is display. 2. Select preferred title by the cursor button and confirm by PTY( ) (2) Press DISP for the second time:.
OPERATION For example: SMART MODE FUNCTION In DVD mode, press S-M button on the DVD unit or DISC (SMART) button on the remote control shortly during disc playback to activate SMART MODE function and “SMART MODE” appears on the display of the DVD unit. When press MOD or MODE button to switch to radio or AV IN mode, the front speakers will output t he corresponding radio audio signal or audio signal of the AV source, and the rear speakers will be muted.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL/PS AUDIO SETUP PIC MODE NORMAL/LB PREFERENCES ANGLE MARK WIDE OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP on the remote control or on the DVD unit in the stop mode. (Press the stop button twice to ensure that the player is in STOP mode.) MAIN PAGE TV Screen 4:3 Video Material 2. The initial SETUP menu is displayed. Normal Pan Scan Wide (16:9) Letter-box 4:3 3.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --- TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG ENGLISH CAPTIONS CAPTIONS FRENCH SCR SAVER SCR SAVER GERMAN SPANISH MAIN PAGE MAIN PAGE PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture with noise or distortion.
SETUP --- GENERAL PAGE --- AUDIO SETUP --- AUDIO SETUP --- TV DISPLAY PIC MODE SPDIF OFF ANGLE MARK OP MODE ON OSD LANG DUAL MONO CAPTIONS DYNAMIC SCR SAVER ON PRO LOGIC OFF LPCM OUTPUT MAIN PAGE MAIN PAGE SCR SAVER setup Select the SCR SAVER ON/OFF. SPDIF This is to activate the digital audio output on or off.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- SPDIF TV TYPE AUTO 6/8 AUDIO NTSC 4/8 SUBTITLE PAL 2/8 DISC MENU OFF PARENTAL OP MODE FULL DYNAMIC LPCM PASSWORD DEFAULTS SMART NAV MAIN PAGE LOGO DYNAMIC RANGE CONTROL Select DYNAMIC and adjust the dynamic range of a Dobly Digital encoded program. There are 8 steps between full compression and off compression. MAIN PAGE TV type setup This player can play discs recorded in either PAL or NTSC format.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --TV TYPE TV TYPE 1G AUDIO ENGLISH AUDIO 2 SUBTITLE FRENCH SUBTITLE 3 PG DISC MENU SPANISH DISC MENU 4 PG 13 PARENTAL CHINESE PARENTAL 5 PASSWORD JAPANESE PASSWORD 6 PG-R DEFAULTS GERMAN DEFAULTS 7 NC-17 SMART NAV OFF SMART NAV 8 ADULT LOGO LOGO NO_ PARENTAL MAIN PAGE MAIN PAGE PARENTAL Select suitable parental guidance by the cursor buttons and confirm by pressing ENTER button or OK button on the remote control SUBTITL
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --TV TYPE TV TYPE AUDIO AUDIO SUBTITLE SUBTITLE DISC MENU DISC MENU PARENTAL PARENTAL PASSWORD PASSWORD DEFAULTS DEFAULTS RESET SMART NAV SMART NAV ORIG LOGO LOGO LOGO CUST LOGO MAIN PAGE MAIN PAGE DEFAULTS Select reset to revert to factory initial settings. LOGO Select ORIG LOGO (original picture when the unit turns on ) or CUST LOGO (customer-set picture when the unit turns on).
TROUBLE SHOOTING DISTORTED SOUND FROM HIFI AMPLIFIER • Check to make sure that no audio connections are made to the amplifier phono input. If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.
SPECIFICATIONS GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 KHz) Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 178 (W) x 160 (D) x 50 (H) : : : : ± 10 dB ± 10 dB 4 x 80 watts 15 Ampere (max.) DVD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 45 dB : 20 Hz - 20 kHz RADIO FM 87.5 to 108MHz 10.
SPECIFICATIONS Supply voltage: Current consumption: Signal system: Discs played: 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 2A Compositive video 1.0Vp-p 75Ω (1) DVD-VIDEO disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact disc (CD-DA/CD-R/CD-RW/MP3) (3) 5” (12 cm) VIDEO CD 10kΩ (2 ch 2.0 Vrms) Audio output level: Note: Specifications and design are subject to modification, without notice, due to improvements in technology.
