User Manual

4
Panel Descriptions
1 DC IN jack
Connect the included AC adaptor to this jack.
* Use only the AC adaptor that came with this unit.
2 Ground terminal
Connect this to an external earth or ground if necessary.
If noise is heard when connecting an external device, connect the
ground terminal to reduce the noise.
3 USB port
You can play back and record the sound of this unit using your
computer, iPad or iPhone.
Connect these devices using a commercially-available USB B-type
adaptor or cable.
The CUBE STREET II uses standard OS drivers. Special drivers are not
necessary.
4 Bluetooth ADAPTOR connector
Connect the BT-DUAL (BOSS Bluetooth® Audio MIDI Dual Adaptor,
sold separately) to wirelessly play back music from your mobile
device like a smartphone or tablet (hereafter “mobile device”), or to
edit the eects from a dedicated app on your mobile device (p. 8).
5 FOOT SW
If you connect a footswitch (BOSS FS-6, FS-7, or FS-5U, sold
separately), you can use your foot to control LOOPER operations
(p. 7), or turn CHORUS, HARMONY and other eects on/o.
* Pin arrangement of LOOPER/GUITAR/MIC jack and HARMONY/MIC/
INST jack
1: GND2: HOT
3: COLD
1: GND 2: HOT
3: COLD
TIP
RING
SLEEVE (GND)
Stereo 1/4” phone type ,
Stereo 1/4” phone type
or
FS-5U
RING
TIP
TIP
RING
RING TIP
FS-6 FS-7
Stereo 1/4” phone type ,
1/4” phone type × 2
or
Rear Panel (Connecting Your Equipment)
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
1
Use the cord hook to secure
the cord of the AC adaptor as
shown in the illustration.
Plugs shown in this illustration
XLR
1/4” phone (mono)
1/4” phone (stereo)
4-pole mini phone
Mini stereo phone
3 4 5 6 7 8 9 10
2