User Manual

3
Panel Descriptions
10 [AMP TYPE] knob
Selects the amp type. All provided amp types are original.
[AMP TYPE] knob
This knob switches between amp type variations.
Type Explanation
A-GUITAR
Use this type when connecting an acoustic guitar.
This adjusts the resonance of the acoustic guitar body.
NORMAL
A direct sound that doesn’t adjust the
resonance.
BRIGHT
A brilliant sound extending to the
high range.
WIDE
A full sound with emphasized body
resonance.
INSTRUMENT Select this when connecting a musical instrument.
E-GUITAR
Select this when connecting an electric guitar.
CLEAN
This is an original amp that provides a
clean and natural sound with a sense
of transparency. Use this together with
the chorus and reverb of this unit for a
spacious, three-dimensional sound.
CRUNCH
This original amp delivers a fat crunch
sound, with each note sounding
clearly.
LEAD
This is a high-gain original amp that
produces thick-sounding distortion.
ACOUSTIC SIM
This is an original amp that transforms
the sound of a connected electric
guitar into the sound of an acoustic
guitar.
MIC Select this if you’ve connected a microphone.
11 [GAIN] knob
Adjusts the gain (amount of distortion).
12 [VOLUME] knob
Adjusts the volume of the GUITAR/MIC channel.
Common to Both Channels
13 [i-CUBE LINK/AUX IN] knob
Adjusts the audio volume from the i-CUBE LINK/AUX IN jack, USB
port (USB IN) and Bluetooth®.
* Note that the CUBE STREET II does not oer Bluetooth functionality.
You’ll need to attach the BT-DUAL (sold separately) to use Bluetooth
(p. 8).
14 [OUTPUT POWER] switch
Changing the setting of this switch changes the maximum volume
of the internal speaker and the available operating time on
batteries.
Setting Explanation
MAX
The maximum volume is louder, but the available
operating time is shorter.
ECO
The maximum volume is reduced, but the available
operating time is longer.
15 LOOPER
You can record up to 90 seconds (in mono) and play back the
recorded section over and over. You can also layer additional
performances with the recording as it plays back (overdubbing).
This lets you play along with your own backing tracks on the y
(p. 7).
* The factory default setting is set to a maximum of 45 seconds
(stereo). With the dedicated mobile device app, you can select up
to a maximum of 90 seconds (mono). For details, refer to “Wireless
Connection with a Mobile Device” (p. 8).
[LOOPER] button
Switches between recording, loop playback, and overdubbing.
[STOP] button
Stops recording or playback.
REC/PLAY/DUB indicator
Indicates the status of the looper.
16 [POWER] switch
Turns the power of this unit on/o.