User Manual

2
Panel Descriptions
MIC/INSTRUMENT Channel
1 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
2 [REVERB] knob
Adjusts the reverb depth.
3 [SELECT] switch
Switches to the input level that’s appropriate for the device you’ve
connected.
Use the “MIC” setting if you’re connecting a mic, or use the “INST”
setting if you’re connecting an acoustic guitar or a keyboard.
4 [VOLUME] knob
Adjusts the volume of the MIC/INSTRUMENT channel.
5 HARMONY
This adds natural harmonies to the audio that is input from the MIC/
INSTRUMENT jack.
[HARMONY] knob
Use this to turn the harmony on/o, switch between harmony types
and adjust the volume. The setting changes depending on the
position of the knob.
Type Explanation
UNISON
Creates an eect that sounds like someone else singing the
same melody together.
HIGH Adds harmony notes based on upper fourths and thirds. *1
HIGHER Adds harmony notes based on sixths and fths. *1
*1 Other pitches may be added under certain conditions.
[KEY] button
This sets the key for the harmony (p. 6).
GUITAR/MIC Channel
6 [TUNER] button
Press to tune your guitar (p. 6).
7 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
8 [CHORUS/DELAY] knob
This knob switches between chorus or delay, depending on the
position.
Type Explanation
CHORUS
Chorus is an eect that creates a beautiful spaciousness
and depth by adding a slightly modulated sound.
DELAY Changes the delay time and eect.
9 [REVERB] knob
Adjusts the reverb depth.
1 9 13 14
7 82
3 4
6 10 11
12 15
5
16
Top Panel