Owner’s Manual Battery-Powered Stereo Amplifier Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY” and Owner’s Manual (p. 12). After reading, keep the document(s) where it will be available for immediate reference.
Panel Descriptions Top Panel 1 2 3 4 5 7 6 10 8 9 11 12 MIC/INSTRUMENT Channel GUITAR/MIC Channel 1 EQUALIZER 6 [TUNER] button [BASS] knob Adjusts the sound level of the low-frequency range. [MIDDLE] knob Adjusts the sound level of the middle-frequency range. [TREBLE] knob Adjusts the sound level of the high-frequency range. 2 [REVERB] knob Adjusts the reverb depth. 3 [SELECT] switch Switches to the input level that’s appropriate for the device you’ve connected.
Panel Descriptions 10 [AMP TYPE] knob Selects the amp type. All provided amp types are original. [AMP TYPE] knob This knob switches between amp type variations. Type A-GUITAR INSTRUMENT E-GUITAR MIC Explanation Use this type when connecting an acoustic guitar. This adjusts the resonance of the acoustic guitar body. A direct sound that doesn’t adjust the NORMAL resonance. A brilliant sound extending to the BRIGHT high range. A full sound with emphasized body WIDE resonance.
Panel Descriptions Rear Panel (Connecting Your Equipment) * To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. 1 3 4 5 6 7 8 9 10 2 Use the cord hook to secure the cord of the AC adaptor as shown in the illustration. Plugs shown in this illustration XLR 1/4” phone (mono) 1/4” phone (stereo) Mini stereo phone 4-pole mini phone 1 DC IN jack Connect the included AC adaptor to this jack.
Panel Descriptions When connected to the LOOPER/GUITAR/MIC jack SW2 TIP RING Explanation LOOPER CHORUS/ DELAY Operates the LOOPER (p. 7). Turns CHORUS/DELAY (p. 2) on/off. When connected to the HARMONY/MIC/INST jack SW1 TIP HARMONY RING MIC/INST Explanation Turns HARMONY (p. 2) on/off. Turns the REVERB (p. 2) for the MIC/INSTRUMENT channel on/off. * If you handle batteries improperly, you risk explosion and fluid leakage.
Useful Functions Setting the Harmony Key Using the Tuner Here’s how to specify the key used when adding harmony. You can use “chromatic tuning,” which automatically determines the closest pitch to that played by the string, or “manual tuning,” whereby you select each individual string to tune separately. 1. Press the [KEY] button. Each press of the button cycles between settings 1 and 2, shown below.
Useful Functions Using the Looper Record standby Stop/clear Press the [LOOPER] button to enter record standby mode. To stop, press the [STOP] button. To clear the phrase, hold down the [STOP] button for at least two seconds while stopped. Record Loop playback When audio is input, recording starts immediately. Press the [LOOPER] button to play back from the point where you want to loop. Overdubbing The loop plays back. Pressing the [LOOPER] button switches to overdubbing.
Wireless Connection with a Mobile Device Attach the BT-DUAL (sold separately) to the CUBE STREET II to wirelessly play back music on your mobile device, or to edit the effects of this unit from the app on your mobile device. * Note that the CUBE STREET II does not offer Bluetooth functionality. You’ll need to attach the BT-DUAL (sold separately) to use Bluetooth. Attaching the BT-DUAL Attach the BT-DUAL to the Bluetooth ADAPTOR connector of the CUBE STREET II. 1. Turn on the power of the CUBE STREET II.
Wireless Connection with a Mobile Device Controlling the CUBE STREET II from a Mobile Device App 4. In the app’s settings, connect to CUBE-ST2 MIDI. NOTE Do not tap “CUBE-ST2 MIDI” shown in the Bluetooth settings of the mobile device. Use the “CUBE STREET II Editor” app to edit effects and save settings on this unit. For details on the CUBE STREET II Editor, see the BOSS website. https://www.boss.
Restoring the Factory Settings Here’s how to restore the settings of the to their factory-set condition (factory reset). MEMO You can use the CUBE STREET II Editor to back up the settings stored on this unit to your mobile device. To save the settings, back up with the CUBE STREET II Editor. 1. While holding down the [STOP] button, turn the power on. The REC0PLAY indicators repeatedly blink in sequence. When the blinking stops, all of this unit’s settings return to the factory-set state.
Main Specifications Rated Power Output Nominal Input Level Nominal Output Level Speakers 10 W (5 W + 5 W) MIC/INSTRUMENT INPUT: -40 dBu (2 Ω)/-20 dBu (11 kΩ) GUITAR/MIC INPUT:-10 dBu(1 Ω) i-CUBE LINK/AUX IN: -20 dBu (15 kΩ) LINE OUT: -10 dBu (MONO) 16 cm (6.
USING THE UNIT SAFELY WARNING Use only the supplied AC adaptor and the correct voltage Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor’s body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. Use only the supplied power cord Use only the attached power cord.
