To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Content Precaution...................................... 2 RDS function.................................. 19 Safety Information......................... 3 Media Operation............................. 21 Disc Note....................................... 4 Basic Operation .............................. 22 Installation .................................... 5 Selecting Play Mode ........................ 22 Electric Connection ...................... 10 On-Screen Display Function .............
Precaution THANK YOU FOR PURCHASING A BOSS AUDIO MULTIMEDIA PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Video Audio and Video Disc size 12 cm VCD Audio and Video Disc size 12 cm CD Audio Disc size 12 cm MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damaging.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation 1.
Installation 2) Attaching the control panel onto the chassis; (1) Insert the left side of the control panel into the hollow of the chassis . (NOTE : the “bulge” point on the control panel must be attached into the hollow of the chassis .) (2) Gently push the right side of the control panel till you feel a “ Click” . 1 Hollow 2 Bulge 3) Testing it for making sure that it can work properly . 4.
Installation Installation Diagram DASH BOARD HEX NUT SPRING WASHER METAL MOUNTING STRAP PLAIN WASHER CONSOLE TAPPING SCREW SLIDE BRACKET HOUSING HEX BOLT SCREWDRIVER TABS KEY PLATE KEY PLATE PLASTIC FRAME If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
Installation Installing the monitor. 1) Press the OPEN/MONITOR-ANGLE button to slide the monitor holder out and stand it up. 2) Insert the 2 bulges of the monitor into the 2 hollows of the monitor holder and flip up the monitor, then push the top middle part of the monitor to make the monitor attach onto the monitor holder. Hollow Bulge Hollow Bulge MONITOR REL Removing the monitor.
Electric Connection WIRING CONNECTION RCH IN RED AV IN SUBWOOFER GREY VIDEO OUT(2) YELLOW REAR CAMERA INPUT YELLOW VIDEO IN YELLOW LCH IN WHITE FRONT RCA OUTPUT CABLE REAR OUTPUT CABLE RCH RED FRONT RCA RED R VIDEO OUT YELLOW LCH WHITE FRONT RCA WHITE L RADIO ANTENNA JACK KEY GROUND(BLACK) KEY 1(BROWN) KEY 2(WHITE) FUSE RED IGNITION SWITCH(B+) MEMORY BACK-UP(B+) FUSE YELLOW GROUND(B-) AUTO ANTENNA FRONT LCH SPK. REAR LCH SPK.
Remote Control 2 1 1. OSD BUTTON 19 3 2. PROG BUTTON 3. LOUD BUTTON 4 4. NUMBER(0~ 9 )BUTTONS 37 36 5. C LOCK BUTTON 20 5 21 6 6. ANGLE/MO/ST BUTTON 22 7 7. LOC/SLOW BUTTON 23 8 24 9 8. STOP BUTTON 25 10 26 9. I<< BUTTON 27 10. SELECT BUTTON 11 28 11. VOLUME+/- BUTTONS 29 12 13 30 14 12. STEP/TEL BUTTON 31 13. SRC BUTTON 33 14. MUTE BUTTON 32 15 16 15. BAND BTTON 34 17 35 16. OK BUTTON 18 17. INT BUTTON 18. RPT BUTTON 28. POWER BUTTON 19. ANG BUTTON 29.
Remote Control Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Basic Operation Main Menu Operation In many modes, touch the icon or touch the range to enter the main menu, the message like following as below. Setup interface 1 (4) 10:00AM ILLUMINATION COLOR (1) (2) (3) Setup interface 2 (5) ADJUSTABLE ITEMS: 1. POWER icon In any modes, touch the POWER icon to switch the unit off . GENERAL ANIMATION 2. UP/DOWN icon Touch this icon to adjust the angle of the monitor upward or downward until your desired angle . 2 MINUTE KEY BEEP ON DISC ... RADIO ...
Basic Operation changes to the Parental Control menu below .) Key in “0000” and then turn to rating then you can setting as follow: KID SAFE -> G -> PG -> PG-13 -> PG R -> R ->NC-17 -> ADULT Disc setup as follow: DISC FORMAT AUTO TV TYPE 16:9 RATING ADULT FORMAT This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select).
Basic Operation TREBLE: -7 to +7 Adjust treble level . LANGUAGE Touch to select OSD language. BASS: -7 to +7 Adjust bass level . ILLUMINATION COLOR Touch to select the backlight for all buttons. Tap auto icon the backlight change automatically. SUBWOOFER: touch to adjust subwoofer volume and frequency. EQ: touch to select audio mode as follow: USER -> JAZZ -> CLASSIC -> POP -> ROCK CALIBRATION Touch the arrow as show to calibration the display.
Control Panel UNIT KEYS 17 16 4 8 12 9 5 3 13 11 10 15 7 18 1 2 Control Panel RESET 14 6 Sliding Pl ate di agram af ter remo ving Co ntrol Panel 1. AUX IN JACK 10. EQ BUTTON 2. USB PORT and COVER 11. >>|/ BUTTON 3. SEL BUTTON and VOL KNOB 12. |<|| BUTTON 5. MUTE BUTTON 14. SD/MMC CARD SLOT 6. RESET BUTTON 15. LCD SREEN 7. EJECT BUTTON 16. OPEN BUTTON 8. POWER/SOURCE BUTTON 17. MICROPHONE 9. BAND BUTTON 18.
Control Panel Same functions in any work source 1. POWER button and icon In power off mode, pressing POWER button on remote control or pressing POWER button on control panel powers on main unit. In power on mode, long pressing POWER button on control panel or on remote control or touch icon on source menu powers off main unit. 2. VOL knob & VOL+/VOL- buttons To adjust volume level, rotate VOL knob on control panel or press or hold VOL+ or VOLbutton on remote control. 3.
Touch Screen Operation RADIO OPERATION Listening to Radio Briefly touch “ ” to decrease frequency by one step of channel spacing. Touch the RADIO ICON in home menu to enter the RADIO mode. In radio mode, tap icon to adjust the brightness for the display . Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.
Touch Screen Operation Automatic Memory Storing & Program Scanning REG FUNCTION at certain times some stations divide up their programs into regional programs with varying content . REG ON : the message “REG ON” will appears in the display for a few seconds . Note : - the display capacity is limited . It is possible that in the double display mode some segments of the display are deleted .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display . (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display .
Touch Screen Operation Media Operation In audio play mode, the message will display as below : To skip the next track To skip the previous track Repeat Function Random Function Previous menu Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function). In audio play mode, tap icon to adjust the brightness for the display .
Touch Screen Operation BASIC OPERATION Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . Pause (still picture) Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback . SELECTING PLAY MODES During the Disc playback, select the “RPT, RDM, INT ” to select your favour play mode.
Touch Screen Operation T 00 1/004 C 001 /00 1 FOR VCD : Press the INT button on the remote control. It display will following menu as below : SEQ PLAY INTR O 1 2. Example for VCD/SVCD, when it is on, it will display the information such as: Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) FOR Digital Video/MP3 : For Digital Video/MP3 , press the INT button is not available . 3.
Touch Screen Operation FOR VCD (With PBC OFF) : Touch the screen as show or press the GOTO button on remote control; the screen will display the following message : Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation Digital Video Special Function 1. Multi-subtitle Language Function (for Digital Video Only) 3. Multi-Angle Function (for Digital Video Only) During Digital Video playback. Touch the icon on touch screen(or press the SUBT on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order. During Digital Video playback, touch the icon on the touch screen .
Touch Screen Operation 5. A-B Repeat (for Digital Video and VCD) 3 Use the number button to input desired sequence number of title/ chapter/track with desired sequence. Press the A-B button if you want to repeat a specific segment on a disc that you define: 4 After input your favour, press >II on remote or use the direction buttons to select play and then press OK on remote to play the programmed titles/ chapters/tracks in programmed order. 1.
Touch Screen Operation BT Operation 1. Pairing and Connecting Prior to using the BT device named Boss BVS10.1B as a hands-free system for a BT-enabled mobile phone for the first time, you must pair and connect them as follows: * During operation of the device named Boss BVS10.
Touch Screen Operation b. Use the number icons or buttons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it. icon or press button on control panel 2) Redial last dialed phone number Touch icon or long press redial button on remote control to dial out the last dialed phone number. 3) Answer a call During an incoming call, the incoming telephone number displays in the the BT PHONE interface.
Touch Screen Operation Mute function To select the Equalizer mode To decrease the volume level To increase the volume level Loudness Function Subwoofer Function Turning pre-switching for traffic announcements on and off Switching on and off an Alternative frequency Play/Pause the playing To skip the next track To skip the previous track Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function). In BT music mode, tap icon to adjust the brightness for the display .
Touch Screen Operation AUX Operation On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the
Touch Screen Operation AV Operation Please plug the
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . When electric resistance is too low, touch this icon to increase. When electric resistance is too high, touch this icon to reduce. 10:00AM 10:00AM During setting, touch the turn to home menu. icon to Before operation, press the icon to cancel the original input that to set your favour.
Parental Control * Parental Control Q: After inserting a Digital Video disc into the disc slot, if a dialogue box pops up and asks you to input a password, what should you do ? A: The playing disc is locked by a rating level of parental control.
Region Code * Region Code If you insert a disc into the disc slot and REGION ERROR is displayed, the car multi-media system can not play the disc. The reason is that the region codes of the car multi-media system and the used disc do not match each other. Appendix: Region code of D igital Video Motion Picture Association of America (MPAA) divided the world into 6 regions, and gave every region a region code for locking and unlocking D igital Video playback.
Specification Specification General Power Supply Requirement..................................................DC 12V Current consumption........................................................10A MAX. Maximum Power Output ........................................................ 4 x 85W Audio Signal Output ................................ Front, Rear, and Subwoofer Output Frequency Response................................................... 20 Hz - 20 KHz S/N Ratio ...........................................
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
