023619
Additional Information Contents 00 11 Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . Problem No power.
TV (optional) 10 TV Touch Screen Menu Press SRC to switch to TV mode: Contents 00 SEEK-/SEEK+ Briefly press to select frequency, hold and press to tune. SEEK ALL Press to tune automatically and save the stations too. SYSTEM Please according to the local area to set the TV system, to make sure the receiving is the best. EXIT Note: On Screen Display * Press the screen to turn out this menu. CH03: The current channel.
Before You Start IMPORTANT SAFEGUARDS About this manual Tuner RDS Setup 4 1 Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle, s electrical system. 2 Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body. 3 Make sure all the connections are completely correct before turning on your unit.
Tuner 09 Before You Start 01 MO/ST Selector Number Buttons PRECAUTIONS During radio status, you can press 6 ST button on the remote control to select MONO mode or STEREO mode. During radio status, press Number Buttons to receive the stored stations. This unit can play the following discs only: Stereo reception is charged when stereo appears. It is switched to MONO mode when appears. mono Note: * It is only valid on remote control.
Before You Start 01 Maintenance Tuner 09 Listening to the radio FM1 CH:1 During radio status, repeatedly press 3 BAND button to select bands in the following order: 87.50MHz Replacing the Fuse Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer. ! FM1 87.
Before You Start MP4 08 Setting the Playback Time During MP4(AVI,MPEG4) playback, firstly press 2 GOTO, and monitor shows : --:--, press your desired time of the playback by using number buttons. and press ENTER to set the status. Secondly press GOTO button, and the monitor shows: --:--:--, input your desired time, then press ENTER. Note: * This function is operated by using the remote control. Skip backward/forward/F.F /F.
Before You Start 01 Remote Control MP4 08 Basic Operation of Mp4 Pause the Playback Insert a MP4(AVI,MPEG4) disc into the slot, the unit will automatically switch on, if a disc is loaded, press 1 SOURCE to start the playback. During MP4(AVI,MPEG4) playback, press 17 button to suspend the playback, Press it again to return to normal playback. Note: button on the head unit to * You can press eject the MP4 disc. Note: * Press on the head unit or performs the same function.
VCD/CD 07 Before You Start Selecting Channel Program Playing During VCD status, repeatedly press 6 AUDIO button to select the following channel: During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing.
Before You Start 01 VCD/CD Specifications General AM Tuner Section Power Requirement 14.4V DC (11-16V allowable) Frequency Range (Optional) Load Impedance Max.Power Output Tone Controls Dimensions TFT Sizes 10dB Bass 100Hz Treble 10KHz Approx.160x178 x 50 mm (d/w/h) Approx.170 x 117.5x16.5 mm (d/w/h) Angle between folded and unfolded Weight 30~100 Approx.2.
VCD/CD 07 Installation Playing a VCD/CD Number Buttons Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. Press one of 23 Number Buttons(0~9) to Note: * You can eject a disc by pressing button on the base or on the remote control or in the monitor. Selecting Tracks Fast During VCD/CD playback, firstly press 21 to replay the current track, press 21 again to play the backward track, Press 21 to play next track.
Installation 02 MP3 Install the Unit 06 Playing a MP3 Disc Insert a MP3 disc into the slot, the unit will automatically switch on, if a MP3 disc is loaded, press SOURCE to start the playback. During MP3 playback, the moving playing information displays on LCD. When playing a disc included PIC file, first press 18 , then press [ ][ ] to select the option.
DVD 05 Installation Install the Unit ---Password Setup page--- Password Mode Installation Method Example showing how to set password mode: (Press (Press --Password Setup Page-Password Mode On Password Go To Password Setup Page 02 , or , then press ENTER) Installation using the screw holes at the sides of the unit.
Common Operations 03 DVD Reset the Unit Setting the Sound Characteristics Operating the unit for the first time or after replacing the car battery, you must reset the unit. Repeatedly press 14 SEL button to select the desired mode in the following order: Remove the front panel at first, and then Press 9 RESET button in the panel with a pointed object, (such as a ballpoint pen) to set the unit to initial status.
Common Operations DVD 05 ¼ò¹ µÊ ¥Å ÕÅ ÏÖ ³¸ ý Ä Clear Ï ---Preference page--- Eject a Disc Press TV Type (Press , --Preference Page-TV Type Audio Subtitle Disc Menu Parental Default Auto Eng Eng Eng Go To Preference Page button to eject or insert a disc. Note: Example showing how to set TV type: (Press or , then press ENTER) * Pressing on the remote control performs the same function.
Main Menu 04 Set up Main Menu When the unit is on, the monitor will display the menu as follows: FM1 CH:1 DVD 1.Audio Adjust 05 --General Setup Page-- After selecting AUDIO, the sub menu will appear as follows: Captions 87.50MHz Example showing how to set captions on/off: (Press (Press , --General Setup Page-87.50M 90.00M 98.00M TV Display Angle Mark OSD Lang Captions Screen Saver 87.50M 108.00M 106.
DVD 05 Main Menu --General Setup Page-- TV Display (Press , --General Setup Page-TV Display Angle Mark OSD Lang Captions Screen Saver 3.Source Adjust After selecting VIDEO, the sub menu will appear as follows: In the main menu, press SOURCE in the monitor, the sub menu will appear as follows: or In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE, EXIT. You can adjust RADIO, DVD, AUX and TV to ON or OFF, press the corresponding button to set.
Main Menu 04 Clock System DVD Next Setup Press to display the menu follows, press to display the previous one. 05 Changing audio language (Multi-audio) DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: EXIT AUDIO 1 Press CLOCK SYSTEM in the monitor to set 12 HOUR or 24 HOUR in this menu.
DVD 05 Main Menu System Switch During playback mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. Press and hold 8 OSD to display the current setup. AMS Fullup 04 Local Note: * Press DISP on the head unit performs the same function. LOCAL AREA LOCAL GOTO FREQ DVD Playback Setting Note: * The function can be operated by selecting the DVD MENU SETUP. Slow motion playback During DVD mode, press SLOW to slow forward or slow backward.
Main Menu 04 TA Volume DVD Press in picture 1 or press to enter the following menu: in picture 2 RT SCROLL Note: * You can eject a DVD by pressing button on the base or on the remote control or in the monitor. TA VOLUME REGION Playing a DVD Insert a DVD disc into the slot 14 , the unit will automatically switch on, if a DVD disc is loaded, press SOURCE to start the playback.
