Contents 00 Additional Information 09 Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . Problem No power.
Contents Tuner 08 GOTO FREQ ON/OFF SETUP 00 2.AUDIO SETUP Select AUDIO SETUP, press ENTER, the sub-menu will appear as follow: To set your desired GOTO FREQ ON or OFF by pressing , and , and ENTER. The default setting is ON. When the setting is OFF, the GOTO function is invalid. AMS FULLUP ON/OFF SETUP 6 To set the above items in this menu by pressing , and , and then press ENTER.
Before You Start IMPORTANT SAFEGUARDS 1 Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle, s electrical system. 2 Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body. 3 Make sure all the connections are completely correct before turning on your unit.
Tuner 08 Before You Start 01 MO/ST Selector Number Buttons PRECAUTIONS During radio status, you can press 6 ST button on the remote control to select MONO mode or STEREO mode. During radio status, press Number Buttons to receive the stored stations. This unit can play the following discs only: Stereo reception is charged when steoer appears. It is switched to MONO mode when appears. mono Note: * It is only valid on remote control.
Before You Start 01 Maintenance Tuner 08 Listening to the radio FM1 LW Replacing the Fuse 1 FM3 MONO Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer. ! Insert the Battery Holder into the Remote Control.
VCD/CD 07 Before You Start Selecting Channel Program Playing During VCD status, repeatedly press 23 AUDIO button to select the following channel: During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing.
Before You Start 01 Remote Control VCD/CD 07 System Switch On Screen Display During VCD mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. During VCD/CD status, brief press 8 OSD button the display shows: Title elapsed time AUTO NTSC OFF PAL chapter remain time Chapter elapsed time Press and hold 8 OSD to display the current setup. Note: 20 Title remain time * The function is only valid on remote control.
VCD/CD 07 Before You Start 01 Playing a VCD/CD Number Buttons SOURCE/POWER VOL+/VOL-/SEL Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. Press one of 23 Number Buttons(0~9) to select a track to play automatically. GOTO (playing time/track) RPT(Repeat Playing) RDM (Playing Tracks at Random) BAND/TITLE Note: Note: * You can eject a disc by pressing base or on the remote control.
Before You Start 01 MP3 Specifications 06 Pause the Playback During Mp3 playback, press itch between play and stop. General AM Tuner Section Power Requirement 14.4V DC (11-16V allowable) Frequency Range (Optional) Load Impedance Max.Power Output 80W x 4 Tone Controls 10dB Bass 100Hz Treble 10KHz Dimensions TFT Sizes Approx.160x178 x 50 mm (d/w/h) Approx.170 x 117.5x16.5 mm (d/w/h) Angle between folded and unfolded Weight 30~100 Approx.2.
Installation MP3 06 Wiring Connection Playing a Mp3 Disc Number Buttons Insert a MP3 disc into the slot, the unit will automatically switch on, if a MP3 disc is loaded, press SOURCE to start the playback. During MP3 playback, the moving playing information displays on LCD. When playing a disc included PIC file, first press 18 , then press [ ][ ] to select the option. Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: * You can eject a disc by pressing 2 base.
Installation 02 DVD Install the Unit 05 ---Preferences page-- Default Parts List Example showing how to set load factory setting: (Press (Press --Preference Page-- M4x3 £p &M5x5 £p Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 6 Installation Method Go To Preference Page 7 Connecting Wire x1 Outer Trim Frame x 1 4 Screws Each TV Type Audio Subtitle Disc Menu Parental Password Default Auto Eng Eng Eng , or , then press ENTER) --Preference Page-TV Type Audio Subtitle Disc Me
DVD 05 Installation Install the Unit ---Preferences page-- Disc Menu Installation Method Example showing how to set Disc Menu Language: (Press (Press , --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Auto Eng Eng Eng Go To Preference Page or , then press ENTER) Installation using the screw holes at the sides of the unit.
General Operations 03 DVD Reset the Unit Setting the Sound Characteristics Operating the unit for the first time or after replacing the car battery, you must reset the unit. Repeatedly press 14 SEL button to select the desired mode in the following order: Remove the front panel at first, and then Press 9 RESET button on the base with a pointed object, (such as a ballpoint pen) to set the unit to initial status.
DVD 05 General Operations ¼ò¹ µÊ ¥Å ÕÅ ÏÖ ³¸ ý Ä Clear Ï --Dolby Digital Setup-- Eject a Disc Press Dual Mono (Press , --Dolby Digital Setup-- or , then press ENTER) * Pressing on the remote control performs the same function. Dual Mono Dynamic Stereo L-Mono R-Mono Mix-Mono Mode Selector Press OPEN button to slant the monitor, press and hold it again, the monitor will return to initial status.. Repeatedly briefly pressing 1 SOURCE button to select radio mode or playback mode.
Main Menu 04 DVD Set up Main Menu 1.
DVD 05 Main Menu 04 2.Video Adjust --General Setup Page-- Image Format Selection Selecting WIDE in VIDEO ADJUST. TV Display Selecting VIDEO ADJUST in main menu, press ENTER to enter setting system.
Main Menu 04 3.Source Setup DVD DVD ON/OFF Selecting SOURCE SETUP in main menu, press ENTER to enter setting system. 05 Changing audio language (Multi-audio) DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: AUDIO 1 This menu can set up the above items by pressing [ ] and [ ] and ENTER.
DVD 05 Main Menu System Switch During playback mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. AUTO NTSC Press and hold 8 OSD to display the current setup. 04 DISC CHANGER Setup Clock System Note: * Press the DISP button on the head unit perform the same function. DVD Playback Setting PAL Note: * The function can be operated by selecting the DVD MENU SETUP. Slow motion playback During DVD mode, press to slow forward or slow backward.
Main Menu 04 Clock Adjust DVD Reverse Pola 05 Playing a DVD Stop the playback Insert a DVD disc into the slot 14 , the unit will automatically switch on, if a DVD disc is loaded, press SOURCE to start the playback. During DVD playback, firstly press , then press or on the remote control to replay. Press again to quit playing completely. Note: * You can eject a DVD by pressing EJ button on the base or on the remote control.
