BV7985 Contents In-Dash AM/FM DVD/MP3/CD Receiver With 4.3 Widescreen TouchScreen TFT Monitor With Front Panel USB Port Precautions .....................................2 Safety Information......................... 3 DISC Special Functions ................ 27 Disc Notes .................................... 4 Selecting audio languages ........... 27 Installation .................................... 5 Selecting Subtitles ..................... 27 Detaching the control panel ...........
Precautions THANK YOU FOR PURCHASING THIS CAR DVD PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Notes Disc formats supported by this player DVD Audio and Video Disc size 12 cm VCD Audio and Video Disc size 12 cm CD Audio Disc size 12 cm MP3 Audio Disc size 12 cm unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT KEY PLATE PLASTIC COVER KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
Installation How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching The Front Panel Before detaching the control panel, be sure to turn off the power. 1). Press the release button and the left hand side of the front panel will release. (FIG. 1) 2). Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3) Attaching The Front Panel 1).
Panel Angle Adjustment CHANGING THE CONTROL PANEL ANGLE When you want to change the viewing angle of the operating unit to play, you can touch the secion on the touch screen (or press the button on the panel ) repeatedly to select the desired angle as follows: Angle 1 Angle 2 Angle 4 Angle 3 Caution: Do not insert your finger behind the control panel.
Electric Connection WIRING CONNECTION MAIN UNIT WHITE ISO CONNECTOR GREEN YELLOW AUX(optional) ANTENNA CONNECTOR RCA CABLE IGNITION SWITCH(B+) RED MEMORY YELLOW BACK-UP(B+) GROUND(B-) REAR RCA OUTPUT CABLE (optional) CHOKE BOX FRONT RCA OUTPUT CABLE BLACK (B+)12V REAR CAMERA SWITCH (B-)PARKING BRAKE REAR CAMERA INPUT VIDEO IN YELLOW RCH IN RED LCH IN WHITE GREY SUBWOOFER VIDEO OUT 2 YELLOW COAXIAL OUT BROWN RCH RED LCH WHITE FRONT RCA RED R VIDEO OUT 1 YELLOW FRONT RCA WHITE L (FOR RCA LINE OU
Remote Control 17 19 3 15 16 5 7 20 2 13 21 6 1 23 14 22 9 18 12 11 26 10 8 1.CLK 2.MODE 3.STOP 4.SETUP 5.MO/ST(AUDIO) 6. SUBTITLE LOCAL/DISTANT 7.REPEAT 8.GOTO 9. and 25 4 24 Press this button to view the clock time. Press again to return to normal display mode. Press repeatedly to cycle through the various modes: RADIO > DISC > AUX IN. Press once to pause playback. Press PLAY/PAUSE to resume playback.
Remote Control When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons. 19. Press this button to adjust the screen viewing angle (see page 7). 20.
Control Panel Key Functions Touch Panel AUX IN LUD SWF TA VOLUME- 5 1 POP DISC AF 11:08 MOD VOLUME+ SEL 15 8 11 3 14 MU/PTY 13 X CH 6 SEL 4 7 CH1-6 10 5 16 12 9 18 17 2 Touch Screen Key : 1. (Angle) : Changing the viewing angle of the operating unit . 7. : Previous 8.Volume+ : volume adjustment (+) 2.TA : Turning pre-switching for traffic announcements on and off . (For RDS) 9.SEL : select the menu of the Sound/Picture 3. AF : Switch on and off and alternative frequency.
Control Panel Unit Keys : 5 1 3 14 15 8 11 18 MU/PTY 13 X CH 6 SEL 4 7 CH1-6 10 5 12 9 16 17 2 1.REL BUTTON Press this button to release the front panel for removal . Refer to see page 7. 2. (POWER On/Off )BUTTON Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display. 3.VOL+/ VOL- knob In normal mode, this knob is used to increase or decrease the volume.
Control Panel AF [Alternative Frequencies] Longer press the TA/AF button , the AF function is activated. The AF symbol appears in the display . (Longer press it again to cancel this function .) The function about RDS to see page 20 . Note: In Radio mode, press and hold the SEL knob for a long time to access the selection menu: REG ON/REG OFF, PI MUTE/PI SOUND, AF ON/AF OFF . Repeatedly the SEL knob to select the item and by using the VOL+/- to change . 7.
Control Panel 11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN) a) In DISC, USB mode: if you wish to jump forwards or backwards press the SEL button (4) briefly in the or direction. (Note: in DVD mode, press the SEL button continually twice in direction to skip back one track during playback.) To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display.
Basic Operation Touch screen POWER On/Off Press it to switch the device ON, press it again to switch the device OFF. Ejecting The Disc Use your singer touch the range on touch screen , the control panel of the unit will swing downwards . Then you can insert the disc or eject the disc . (You can also press the button on the front panel to eject the disc or insert the disc to start play . ) VOLUME+ Touch the screen the VOLUME+ to increase the volume level .
Basic Operation Rear View Camera TFT Monitor Adjustment When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.
Basic Operation Balance: R 0-10 to L 0-10 . A. Initial installation of the unit when Adjust sound balance between left all wiring is completed. and right speakers by using VOL + / - . B. All the function buttons do not operate. Fader: F 0 - 10 to R 0 -10 . Adjust sound balance between front and C. Error symbol on the display. rear speakers by using VOL + / VOL - .
Radio Operation Listening to the Radio Selecting The Frequency Band Switching To Radio Mode Touch the BND section on the touch screen repeatedly to select the band , screen band will show in turn : ( You can also press the BND on front panel repeatedly to select the band . ) BND Touch the MOD range repeatedly on the screen to select the RADIO mode. (You can also press repeatedly the / MOD button to select the RADIO .) the following information will appears\ on the display : MOD FM1 ST 106.
Radio Operation Automatic Memory Storing & Program Scanning To tune in strong-singnal FM Station only (LO/DX function) Automatic Preset Setup Touch the LOC section on the touch screen (or press LO/DX button on the remote) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news .
Radio Operation During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements.
DISC Operation Basic Operation During the DISC playback, use the finger touch the touch screen , it display will following as bellow : DVD LUD 11-0:44:36 POP SWF SUBTITLE AUDIO LUD SET 11-0:44:36 POP SWF DISC 11:08 MOD VOL- 11:08 TITLE GOTO DVD DISC SEL Touch it to select the other item . VOL+ DVD 11-0:44:36 1 2 3 4 5 6 MOD VOL- 12 11 1.Previous 2.Next 3.Pause 4.Stop 5.Mute 6.Mode SEL VOL+ 10 9 8 ENT 7 Above these operation buttons for DVD setup. 7.To next page 8.
DISC Operation Switching the DVD mode MOD Skipping Track During DISC playback, Touch the section on the touch screen to skip to next track. (You can also swing the SEL knob in direction to skip to next track.) Touch the MOD section on the touch screen (or press MOD button ) to select the DISC mode, it display like following : DVD LUD During DISC playback, Touch the section on the touch screen to skip to back one track .( You can also swing the SEL knob in direction to back one track .
DISC Operation 2). RDM(RANDOM) Function Selecting The Play Modes During DISC playback, Touch the RDM section ( press the 4/RDM button longer on remote control to play in random. Each playing, the order is different . (depend on the disc used for VCD). Touch it again to cancel this function . RDM During the Disc playback, touch the touch screen, it will display the following as below : DVD 11-0:44:36 LUD POP SWF DISC 11:08 3).
DISC Operation Note: Touch and hold the 7/ / 9/ section on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.) DISC Search (GOTO) DVD 11-0:44:36 SWF SUBTITLE AUDIO 11:08 AUX Operation SET TITLE GOTO GOTO DISC POP To connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.
DISC Operation ON-SCREEN DISPLAY FUNCTION OSD During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below : 2.Example for VCD/SVCD/CD: A.Touch or Press OSD for first time: SINGLE ELAPSED TRACK 01/16 0:00:56 1. DVD: A.Touch or Press OSD for first time: B.
DISC Special Functions For VCD/CD: during playback, touch the AUDIO section of the touch screen or Press AUDIO on the remote . It is possible to switch the sound between monaural and stereo sound. DVD/VCD Special Function DVD 11-0:44:36 SWF POP DISC MONO LEFT 11:08 MONO RIGHT MIX-MONO STEREO SUBTITLE GOTO AUDIO SET 3. Multi-Angle Function (for DVD Only) TITLE During DVD playback, touch the section or Press ANGLE button on the remote .
Setup USING THE MENU GENERAL SETUP TV Setting DOLBY DOLBY ....GENERAL SETUP PAGE.... ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y TV Display Display TV Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y LB ON ENG SPDIF/RAW ON ON ON Go To General Setup Page Nor mal/PS Nor mal/LB Wide Set TV Display Mode 1. Touch the SET section of DVD setup on touch screen (or press the SETUP on the remote .) 2.
Setup GENERAL SETUP DOLBY DOLBY ....GENERAL SETUP PAGE.... ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y TV Display Angle Mark OSD OSD Lang Lang Spdif Output Captions Screen Saver Last Memor y ON OFF Set Angle Mark SPDIF SPDIF/OFF OFF SPDIF/RAW SPDIF/PCM Setup SPDIF 2.
Setup SPEAKER SETUP GENERAL SETUP .....Speaker Setup Page..... DOLBY DOLBY ....GENERAL SETUP PAGE.... ....Speaker Setup Page.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y DOWNMIX LT/RT STEREO ON OFF Screen Saver Set Downmix Mode This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output.
Setup --- PREFERENCES PAGE --DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle PAL AUTO NTSC Disc Menu Parental Password Default English French Ger man Spanish Italian Por tuguese Off Set TV Standard Prefer red Subtitle Language 1.TV TYPE SETUP 3.SUBTITLE LANGUAGE SETUP This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.
Setup --- PREFERENCES PAGE --Age control DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle 4PG13 5PGR 6R 7NC 17 8ADULT OFF Disc Menu Parental Password Default Set Parental Control RESET Load Factor y Setting 5.PARENTAL 7.DEFAULTS Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button. Select reset to become factory initial setting.
Other Main Operation USB Operation (17) Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.
Other Main Operation MP3/WMA/JPEG/MPEG4 DISC PLAY 1.When inserting an MP3/WMA/JPEG/MPEG4 disc. Ex: When MP3 file is detected. 5 4 3 00:56 2 003/112 1 04:07 1 .Current track(file)(highlighted bar) 2 .Current track (file) number/total 6 Repeat one 3 4 Mp3 K Mp3 woman 1 Mp3 new ton P 5 ....... ....... 6 number of tracks(files) in the current folder. .Elapsed playing time of the current track( not available for JPEG disc) .total playing time. ( not available for JPEG disc) .
Specification Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.0Vp-p 75 (1)DVD-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc Audio Signal Output: Characteristics: 2ch&4ch line out (1)Frequency Response (2)S/N Ratio (3)Wow and Flutter RADIO Section: Frequency Coverage: IF: Sensitivity (S/N = 20 dB): For 3 Bands For 2 Bands (Europe) (Europe) FM FM 87.
Trouble Shooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power Disc can not be loaded or ejected The screen image is black and white when you expect color. No screen image appears. The picture color is poor or faint. JPEG disc can not be played back. POSSIBLE CAUSE The fuse is blown.
