CONTENTS LIST PAGE CONTENTS 2 SAFETY INFORMATION 3 DISC AND FORMAT SUPPORTS 4 ACCESSORY INCLUDED 5 INSTALLATION 7 8 9 10 11 12 DETACHABLE CONTROL PANEL WIRING DIAGRAM-AUDIO/VIDEO CONNECTIONS WIRING DIAGRAM-POWER/SPEAKERS PANEL OPEN/CLOSE OPERATION CONTROL PANEL FUNCTION REMOTE FUNCTION 14 BASIC OPERATIONS 18 DUAL ZONE OPERATION 19 AUDIO OPERATION 21 22 23 24 27 30 TUNER OPERATION RDS OPERATION iPod OPERATION CD OPERATION MP3/WMA OPERATION JPEG CD OPERATION 31 DVD OPERATION 38 MEMORY CAR
1. SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. Caution: In some countries, it's unlawful to operate a vehicle while video is displayed in the driver's viewing area. Pls always switch the unit's display to "Font Type Display" mode by pressing the DISP/MENU button while driving. For safety reason, the driver should only enjoy / watch the video while the car is in parking mode.
2. DISC AND FORMAT SUPPORTS A. DISCS CAN PLAY WITH THIS UNIT Digital Versatile Discs (DVDs) Video CDs (VCDs) HDCD Digital Versatile Discs Recordable(DVD+/-R) Digital Versatile Discs Rewritable(DVD+/-RW) Compact Discs (CDs) CD Recordable (CD-R) CD Rewritable (CD-RW) B. FORMAT CAN PLAY WITH THIS UNIT AUDIO FORMAT Playback CD-DA and MP3 or WMA digital music file on CD-ROM or DVD-ROM Note of MP3 and WMA: Supported Sampling frequencies; 32kHz, 44.1kHz, 48kHz.
3. ACCESSORY INCLUDED When first unpacking your new full detachable DVD head unit, please check first that the package contains all of the items below. If something is missing, contact the store where you purchased the player. Owner’s Manual Ow ma ner n u ’s al Warranty Card Wa r ra C a n ty rd Remote control Lithium Battery 0 CR2 25 + 3V Audio/Video cable Half Sheeve Insert Key 1. 2. 3. 4. 5. 6. 7.
4. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Removing the unit a a. Frame b. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.) c. Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard. b c Trim Plate Installation: Push the trim plate against the chassis until it is fitted.
5. DETACHABLE CONTROL PANEL (D.C.P.) Removing The Detachable Control Panel (D.C.P.). RELEASE BUTTON 1. Turn the Power off. 2. Press the Panel Release Button. D.C.P. 3. Remove the D.C.P. Attaching the Detachable Control panel (D.C.P.) 1. Insert the right side of the D.C.P. Into the main unit. NOTE: The D.C.P. Must be attached into the T-Joint. 1. 2. 2. Press the D.C.P. On to the left side of middle of D.C.P. Until a “click” sound is heard. SH PU CAUTION DO NOT insert the D.C.P from the left side.
6.
7. WIRING DIAGRAM - POWER / SPEAKERS (ISO) FUSE (Not supplied) ANTENNA EXTENDER CABLE ANTENNA JACK 20-PIN AUDIO/POWER HARNESS (See Figure 1 ) FRONT CHANNEL BLUE/WHITE STRIPE POWER AMPLIFIER REMOTE L-CH R-CH RED AMP WHITE L-CH BLACK WHITE RED R-CH GREY REAR CHANNEL (Not supplied) RCA-TO-RCA CABLES Connect to power amplifier, If not used, Tape bare end of wire.
8. PANEL OPEN/CLOSE OPERATION (MOTORIZED SLIDE DOWN VERSION) This unit is equipped with the most advanced full logic motorized slide down system. You can enjoy this advance technology with just a single press of the “OPEN” button Please read carefully the following operation instruction before operating the unit. OPEN / CLOSE THE PANEL: Press the Open button to slide down (open) a closed panel or to slide up (close) an opened panel.
9. CONTROL PANEL FUNCTION 20 6 5 3 18 9 12 13 2 8 (DVD MENU) (DVD AUDIO) 1 21 4 17 16 15 7 14 11 19 10 (DVD MENU) OPERATIONS: SYSTEM KEY Short Press Long Press Power TUNER Short Press Long Press Short Press 1 Mute 2 Open & Close 3 bu ttonbu tton Panel Release bu tton Panel Release Panel Release 4 Audio Menu 5 Mode 6 Encoder Volume Long Press Parking Sub-W Ok 3.
10.
9 12 1 2 8 10 4 5 11 15 16 6 17 13 14 3 18 30 37 34 31 19 38 20 21 35 39 22 24 32 36 25 27 7 33 40 29 23 28 26 OPERATIONS: SYSTEM TUNER CD/M P3/W MA DVD KEY Short Press Long Press Short Press Long Press 23 M5 Memory 5 24 M6 Memory 6 25 Sub-W 26 27 iX-Bass 28 Band Short Press Long Press Track NO. Access File NO. Access Track NO. Access File NO. Access Long Press Numeric 5 Numeric 6 Track NO. Access File NO. Access Numeric 7 Track NO.
11. BASIC OPERATIONS 3) PANEL RELEASE BUTTON (RELEASE) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON ( ) Long press the POWER button or Short Press any other button on the front of the unit (except the Open/Eject) to turn On the unit. Long press the POWER button to turn Off the unit. 1) MUTE BUTTON ( ) Short Press the MUTE button to mute the audio output, and “Mute” will appear on the display. Press the mute button again to restore the audio output to the previous level.
7) FRONT PANEL A/V IN JACK The unit is allowed to connect with external Audio / Video system such like Digital Camera or Game Console. You can connect the external A/V system thru the A/V in jack on front panel. After connect with external A/V system, pressing mode to “A/V In 2” to enjoy this external A/V system on this unit. Left Audio 1 2 3 4 Right Audio Ground Video 3.5mm A/V Cable ( not included ) The unit is support A/V out thru the A/V Jack on front panel.
Menu operations 18) MENU FUNCTION LIST (MENU) Press & hold the DISPLAY/ MENU button for more than 3 seconds to access into the menu. User can navigate thru the menu items by pressing the DISPLAY/ MENU button repeatedly, or by pressing the Tuning Up or Tuning Down Buttons to move to the next or previous menu item. Once the desired menu item appears on the display, user can adjust that option by using the Encoder Vol Knob within 5 seconds.
broader range of signals. To set the unit to select only strong local stations during automatic tuning, rotate the Encoder Vol Knob button until "Local" appears on the display. Tuner Area User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this unit is used in, U.S.A. South America, Europe or Oirt. (Russia Band) IMPORTANT NOTE ON THE EUROPEAN / RDS TUNER SETTING This unit the “Tuner Area” setting is default at “U.S.A” frequency.
12. DUAL ZONE OPERATION “2-Zone” Dual A/V Zone Multi Entertainment Operation: This unit is equipped with the most advance “Dual A/V Zone” feature. This function is useful if the user would like to select different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front speakers and rear speaker for DVD movie.
13. AUDIO OPERATION Audio Menu Short Press “AUDIO“ button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the / “AUDIO” button repeatedly, or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on the display, adjust that option by using the encoder vloume knob within 5 seconds. The following menu items can be adjusted as described above. The unit will automatically exit the Audio Menu after five seconds of inactivity.
MIDDLE Middle (Level) User has 5 seconds to use the encoder volume knob to adjust the desired Middle level range from -6 to +6. Middle-CFQ (C.Frq) User has 5 seconds to use the encoder volume knob to adjust the desired Middle Range Center Frequency to 500Hz, 1KHz, 1.5KHz, or 2.5KHz. Middle-Q (Mid-Q) User has 5 seconds to use the encoder vlome knob to adjust the desired Middle Quality Factor to 2N, 1N, 1W or 2W. Figure 2 shows the middle Quality factor (Curve characteristics) of each step.
14. TUNER OPERATION 19) BAND BUTTON (BAND) Press BAND to change between FM bands and AM(MW) bands. 20&21) TUNING UP/DOWN BUTTON ( / ) Manual Tuning Press the Up Tuning( ) or Down Tuning ( )button for more than 3 seconds to move the radio frequency number up or down by one step. Auto Seek Tuning Press the Up Tuning ( )or Down Tuning ( )button for less than 3 seconds to move to next station automatically. 12~17) PRESET STATIONS BUTTONS Six numbered preset buttons store and recall stations for each band.
15. RDS OPERATION RDS functions The unit is equipped with the following RDS function: AF = Alternative Frequencies CT = Clock Time EON = Enchanced other Network PI = Program identifications PS = Program service name PTY = Program Type REG = Regional Change TA = Traffic Announcement TP = Traffic program 1. AF Function By pressing AF button < 3 seconds to select AF ON/OFF. ‘AF’ icon will light up on the LCD.
16. iPod OPERATION This unit is equipped with iPod Ready function which allow end user to connect the iPod thru the front panel 3.5mm A/V In Jack. Please read below for details operation Connect iPod thru Panel 3.5mm A/V in Jack iPod Video iPod photo iPod iPod mini iPod nano iPod A/V Cable ( The part number for this cable is IPC60 ) The iPod A/V Cable is special tailor made for this unit. Do not use other kind A/V cable on this unit. To purchase this tailor made iPod A/V cable.
17. CD OPERATION Audio CD Operation - TFT Monitor When a Audio CD is inserted into the player and the following picture will appear on the TFT monitor. Audio CD Operation - Remote Control To operates CD function through the following keys on the remote control. 9 10 ~ 8 13 16 15 17 14 18 19 ~ 29 17. 18. 8. 9. 14. 15. 19~29. 32. 10~13. 16. 7.
14) NEXT( ) Press NEXT to skip forward to the beginning of the next chapter. 15) BACK( ) Press BACK to skip backward to the beginning of the previous chapter. 8~9) FAST FORWARD& FAST BACKWARD( or ) 1. Press FAST FORWARD to fast forward through the disc. Each time the button is pressed,a new speed (2X, 4X, 8X or 20X) is selected. 2. Press PLAY to resume normal playback. 3. Press FAST BACKWARD to fast reverse through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected. 4.
Audio CD Operation - Control Panel The following functions are available through the control panel. 12 13 (DVD MENU) (DVD AUDIO) 15 14 TRACK SELECT Press the TRACK UP ( ) or TRACK DOWN ( ) button for less than one second to advance to the next track on the CD, The selected track number will appear on the display. Press and Hold TRACK UP ( ) or TRACK DOWN ( ) button for more than one second to fast forward or fast reverse through the disc. CD play starts when the button is released.
18. MP3/WMA OPERATION MP3/WMA Operation-TFT Monitor When a MP3/WMA disc is inserted into the player and the following picture will appear on the TFT monitor. The player automatically plays the first track. The elapsed time within the track is displayed on the right side of the top line. When the track is finished, the second track will begin playing, and the track number on the top line will be updated.
17) PAUSE/ PLAY BUTTON ( ) 1. Press PAUSE to pause playback (still mode). The sound from the disc is muted during still mode. 2. Press PLAY to resume normal playback. 18) STOP( ) 1. Press STOP to stop playback and show the logo screen. The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD, VCD 1.1, VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc.
MP3/WMA Operation - Control Panel The following functions are available through the control panel. 20 12 13 (DVD MENU) (DVD AUDIO) 21 17 16 15 14 FILE SELECT Press the TRACK UP (20 ) or TRACK DOWN (21) button for less than one second to advance to the next FILE on the disc, The selected file number will appear on the display. Press and Hold TRACK UP (20) or TRACK DOWN (21) button for more than one second to fast forward or fast reverse through the disc.File play starts when the button is released.
19. JPEG CD OPERATION LOADING AND DEFAULT PLAYBACK After inserting the DISC the player searches for and counts the files with appropriate formats (currently only JPG, MP3 and WMA are supported). OSD will show the message: “Searching for files… .” CD-R media and the number of files found will appear over the logo background. When the player has finished searching, it will automatically start Slideshow mode from the first picture; all pictures will be displayed in their file/folder order.
20. DVD OPERATION DVD Operation - Remote control 9 12 2 10 ~ 13 8 11 15 16 17 13 14 3 19 ~ 18 30 37 34 31 38 29 39 35 24 36 32 27 7 33 40 2) EJECT BUTTON ( ) Press the EJECT button to eject the disc or loading the disc. 17) PLAY/PAUSE ( ) 1. Press PAUSE to pause playback. 2. Press PAUSE to single step forward to the next picture in the video (DVD and VCD only). 3. Press PLAY to resume normal playback. 18) STOP( ) 1. Press STOP to stop playback and show the logo screen.
10~13) UP / DOWN / LEFT / RIGHT BUTTON Use these buttons to move cursor up/down/left/right. 16) OK Use this button to confirm the selection. 19~29) NUMERIC BUTTONS 1. When playback CD/MP3/WMA use for track number or File number direct access and use when function need numeric Selection or Input, like in the Goto function,etc. 2. When playback DVD use when function need numeric Selection or Input, like in the Goto function,etc 30A) DVD MENU 1.
35) GOTO BUTTON Using GOTO to Jump to a Specific Time, Chapter/Track, or Title 1. Press GOTO to enable the GOTO Menu. The OSD will display the following: 2. Press the UP/DOWN direction buttons to select the type of search: time search or Chapter/track/title search.
1) Some discs may not respond to the zoom feature. 2) Zooming does not work on subtitles or menu screens included on DVDs. 3) The magnification level and number of available levels vary, depending on the TV TYPE selection in the Setup Menu. 37) TITLE 1. Press TITLE to invoke Title Menu (DVD only, dependent on authoring of disc). 2. Press direction buttons to highlight selected Title Menu entry. 3. Press OK or PLAY to select the highlighted entry.
39) ANGLE Press ANGLE while playing a scene recorded with multiple angles to change the angle (DVD only). The OSD indicates the current angle selected and the total available angles to select, for example: 1) The first press will show the current angle selected. Subsequent presses toggle to the next angle. 2) The TFT monitor will light its angle icon when angle changes are available. 3) Some DVDs allow angle changes only via the disc menu.
DVD Operation - Control panel 6 20 12 13 (DVD MENU) (DVD AUDIO) 21 17 4 15 14 11 Once a DVD disc is inserted into the unit, the unit will automatically start the playback from the beginning of the disc, and then the DVD MENU or ROOT or TITLE in the DVD disc will appear on the TFT monitor and “ROOT” will be displayed on the TFT of the unit. Under the DVD MENU or ROOT or TILTLE is display on the TFT Monitor.
Under the DVD MENU or ROOT or TILTLE is display on the TFT Monitor. The button of Track up / down (20 / 21) use as LEFT / RIGHT direction button, Encoder Volume Knob ( 6 ) as UP / DOWN direction button, and Audio button ( 4 ) as OK button. 17. DVD AUDIO (6 <) Long press DVD AUDIO button during playback to change the audio language (DVD only). The OSD indicates the current setting by giving the audio track number, language, audio type, and number of channels.
21. MEMORY CARD OPERATION The unit can support playback MP3 / WMA / JPEG / MP4 and Divx format which are stored into SD and MMC Memory Card .
22. DivX OPERATION The unit is support playback DivX files , the details operation as same as CD/MP3/WMA operation. The following are special function for palyback DivX File: External Subtitle External Subtitle setting is used for choosing the language domain, (only for DivX). After select one language domain (alphabet), when playback a DivX with external subtitle, the subtitle display will use this language alphabet.
When trying to play a movie that was not purchased for this player (with the registration code above), the following screen will be displayed: When trying to play a limited views movie ( rental ), the following screen will be displayed: A limited views management limits the number of times a user can view the rented movie. An expired error is displayed when this limit is reached, and the movie will not play again. Choose 'Yes' if you wish to use a rental view, or 'No' to abort.
23. SYSTEM SET UP MENU Press the SETUP button to invoke the Setup Menu. Pressing the SETUP button while the Setup Menu is displayed will turn off the Setup Menu. When the Setup Menu is invoked, the OSD will display the following row of text “buttons.” Each button indicates a category of settings that can be changed: The LEFT/RIGHT direction buttons are used to select the category of settings to be changed. To change a category, press OK and the page of settings for that category will be displayed.
Some DVDs may not include the pre-selected language. In this case, the player automatically displays menus consistent with the disc's initial language setting. 2. Preferred Subtitle language Selecting the Subtitle setting allows the user to select a preferred subtitle language (DVD only). Some DVDs may be set to display subtitles in a different language than selected. 3. Preferred DVD Audio Language Selecting the DVD Audio setting allows the user to select a preferred audio language (DVD only).
Video Settings 1. Using the LEFT/RIGHT direction buttons, move to the Video button and press OK. The player's Video settings will appear: 2. Use the UP/DOWN direction buttons to select the setting. 3. Press the OK to display a list of the options. 4. Press the UP/DOWN direction buttons to move among the displayed options. 5. Press the OK again to choose the option and change the setting. The following subsections explain the available options for each of the player's Video settings.
View mode The user may select one of the following options: Fill = Scale up/down the image in horizontal and vertical direction respectively to fill the screen height and width. Original = Fit the original screen size. (Only for DivX / MPEG) H FIT = Height fit. Scale up/down the image in vertical direction to fit the screen height, and keep the same scale ratio for horizontal. W FIT = Width fit.
Digital Output Setting Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player. The following options are available: PCM = A S/PDIF output is connected to a receiver that accepts PCM S/PDIF. Bitsteam= A S/PDIF output is connected to a receiver that accepts CDTS/ACS/ MP3/WMA/MPEG/PCM S/PDIF(factory defance) Off = Digital audio output is disabled.
1) A password is always four digits. 2) If the password is forgotten, the "back-door" password 8888 will unlock the parental control. 3) See the explanation on Rating to see how locking and unlocking the password has An effect on the parental control. Parental Control Rating Selection Selecting a Rating allows the user to set the parental control feature of the player. Press the OK to cycle through the available options.
24. SPECIFICATION TFT Screen Section Screen Size: 3.5"(Measured Diagonally) Screen Type: TFT Liquid Crystal Display active matrix Resolution: 960 (W) x 324 (H) DVD / CD Section Compatible Disc/Format Signal to Noise Ratio Dynamic Range Frequency Response Channel Separation See “ Disc Note” for more details description > 90 dB > 90 dB 20Hz to 20Khz +/-3dB 2 Channel (Stereo) >60dB @1khz Video Section Color System Video Output Video Input NTSC / PAL Composite 1.0 Vp-p (+/- 0.2) 75 - ohm Composite 1.
25. TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power The car ignition is not on. The fuse is blown. Replace the fuse. Disc cannot be loaded or ejected Presence of CD disc inside the player. Remove the disc in the player, then put a new one. Inserting the disc in reverse direction. Insert the compact disc with the label facing upward.
4 10 R - 02 0809
