BV7965 3.6 Notes on installation.........................................................2 Accessories.....................................................................2 Precautions.....................................................................3 Wiring diagram................................................................4 Control panel layout.........................................................5 Basic operation...............................................................6 Radio operation.
NOTES ON INSTALLATION NOTES ON INSTALLATION ● The unit is designed for 12V DC, negative ground operation system only. Before installing the unit, make sure your vechicle is connected to 12V DC negative grounded electrical system. ● The negative battery terminal must be disconnected before making connections, Incorrect can reduce damaging to the unit due to short circuit. ● Be sure to connect the color coded leads correctly according to the diagram.
PRECAUTIONS THIS UNIT CAN PLAY THE FOLLOW DISC ONLY TYPE OF DISC LABEL ON THE DISC RECORDED MATERIAL SIZE OF DISC MPEG4/DIVX Sound and moving pictures 12CM DVD Sound and moving pictures 12CM VCD Sound and moving pictures 12CM MP3/WMA Sound only 12CM CD Sound only 12CM NOTE: Th e uni t is com pact ibl e with DVD, DVD+/-R,VCD 1. 0/ 2. 0/ 3. 0, SVCD,CD,CD-R,CD-RW and JP EG ● DO NOT ATTEMP TO MODIFY THE UNIT, MODIFYING THE UNIT MAY CAUSE AN ACCIDENT.
WIRING DIAGRAM WIRE CONNECTION ! WARNNING BRAKE WIRE MUST BE CONNECTED TO THE (-) SIDE OF THE PARKING BRAKE SYSTEM. IF YOU DO NOT HOOK THIS WIRE UP, YOU WILL GET A WARNING ON THE SCREEN THAT YOU WILL NOT BE ABLE TO WATCH THE VIDEO WHILE THE CAR IS MOVING. YOU WILL BE ABLE TO HEAR THE MOVIE BUT YOU WILL NOT BE ABLE TO WATCH IT UNLESS YOU HOOK UP THE BRAKE WIRE. THEN YOU HAVE TO ENGAGE THE PARKING BRAKE SYSTEM TO WATCH IT.
CONTROL PANEL LAYOUT FRONT PANEL LAYOUT 5
BASIC OPERATION INITIAL SYSTEM STARTS-UP Operating the unit for the first time or after replacing the car battery, you should press (14) to detach the front panel, and LED (15) will be blinking. Press(1) Reset button with a pointed object(such as a ballpoint)to set the unit to initial procedure. NOTE: WHEN SOME ERRORS OCCUR IN THE LCD DISPLAY, YOU CAN ALSO PRESS RESET BUTTON TO RESUME TO NORMAL. AND IT WILL ERASE THE CLOCK SETTING AND SOME MEMORIZED FUNCTIONS.
BASIC OPERATION SETTING EQ While listening music, you can set up rock music, popular, classic music or jazz pre-EQ by pressing(4)"EQ" button the procedure as follows: ● POP mode is selected when the button is first press and rock indicated on LCD. ● POP mode is selected when press the button for the second time and class indicated on LCD. ● Classic mode is selected when press the button for the third time and rock indicated on LCD.
RADIO OPERATION BAND SELECTOR press (6)(band)button repeatedly to select band in the following order: NOTE: ON DVD PLAYING MODE, PRESS (6) BUTTON TO SWITCH TO AUTO PAL OR NTSC SYSTEM MANUAL/AUTOMATIC TUNING 1. Pressing AMS button shortly, the radio searches station from the lowest frequency to highest frequency. When a station strength level is more than the threshold level of the stop level. The radio will holding the station for 5 seconds and the station frequency blinking on the LCD at the same time.
RDS OPERATION RDS(RADIO DATA SYSTEM)OPERATION TA: Operated as follows: -TA is turned ON/OFF and TA indicator is displayed. When traffic announcement is transmitted, regardless of the mode, traffic announcement is received. If VOLUME LEVEL is below 24, VOLUME LEVEL is raised to 24, and returns to its previous mode and volume level when the traffic announcement is over. If volume is adjusted during traffic announcement, only the previous volume is valid.
RDS OPERATION AF/REG AF - AF/REG key directs the activation of AF SEARCH. - AF indicator is displayed when AF is ON, AF search is activated when reception is had. - During FM MODE, when AF is ON, SEEK, SCAN, AUTO, MEMORY function can only receive and save RDS program. However, when italy option is in use, regardless of RDS, programs that satisfy SD LEVEL Can be received and saved. INDICATOR CONDITIONS AF ON AF ON MODE, RDS information is received.
DVD, MPEG4, VCD, MP3,WMA, CD OPERATION DVD, MPEG4, VCD, MP3,WMA, CD OPERATION While listening to (or watching) DVD, MPEG4, DIVX, VCD, MP3, WMA and CD, just insert a Disc (with labeled side up) into the disc slot(12), the mechanism will automatically switch on. While it is Radio /AUX mode and a Disc was loaded, press(9) MOD button to play the Disc. If a ID3 disc is playing. The songs name, artist name and file name will shufft show on LCD. SELECTING TRACKS/ FW.
DVD, MPEG4, VCD, MP3,WMA, CD OPERATION PLAYING TRACKS IN RANDOM ORDER During playback, press "4RDM" button,and "RDM" appears on the display, which indicates RDM function si carried out. The unit plays any track at random. Press RDM once again to return to normal playback mode. STOP PLAYING During playback, press (11) " 5STOP" button to stop the playback, LCD will show "STOP". To return to normal play mode, press 1 button again.
REMOTE CONTROL LAYOUT 26 13
REMOTE CONTROL OPERATION REPLACING THE BATTERY When the operational range of the remote control becomes short or non functions while operating. Replace a new CR2025 battery. Make sure the battery polarity before replacement. POWER BUTTON Press（1） button to turn power On/Off. PAUSE/PLAY BUTTON Press（2） button to suspend the playback of CD,MP3, WMA, VCD and DVD, Press it again to return to normal palyback mode.
REMOTE CONTROL OPERATION VOLUME INCREASING/DECREASING Press(7) (VOL+ or VOL-) button to increase or decrease the volume level respectively. TUNING/SELECTING TRACKS/FAST FORWARD/REWIND During radio mode, continuously press(8) button to manual search a station downward or upward respectively; if press and hold the button for more than 3seconds. The radio will automatically search a station downward of upward respectively until it finds a station.
REMOTE CONTROL OPERATION VOL/BAS/TRE/BAL/FAD SELECTOR During DVD, VCD, and CD mode, Repeat press(11)(SEL) button to select the desired mode in the following order: NOTE: AFTER SELECTING YOUR DESIRED MODE, YOUR CAN ADJUST THE CURRENT MODE BEING DISPLAYED BY(VOL) BUTTON. WHEN P-EQ MODE ISACTIVATED, PRESS SEL BUTTON TO SELECT THE MODES, AND BASS/TREBLE MODE ARE INVALID.(SHOW AS BELOW) REPEAT PLAYING/ AMS 1.press AMS button(12), In CD/MP3/VCD mode, repeat function is: RPT1 , RPT DIR, RPT ALL, RPT OFF.
REMOTE CONTROL OPERATION NUMBER BUTTONS During radio mode, you can select one of the 6 stored stations on each band by pressing any one of the number button(14). During the playing mode, you can select any track directly by using number button(14)(0~10+). For example, if you need the fifteenth track, you can first press button 10+ and press button 5, the corresponding track(15) will be played. NOTE: WHEN BUTTON 10+ IS FIRST PRESSED.
REMOTE CONTROL OPERATION STOP THE PLAYBACK In Disc playing mode, press (20)button to suspend the playback, press it again to stop the playback. MULTI-ANGLE KEY In DVD playing mode, press(21) key, you can watch the DVDcontent from different angle. If the disc supports. SLOW REVERSE/SLOW ADVANCE PLAY During DVD/VCD playing mode, press(22) key once for ½ slow advance, twice for 1/3, third for 1/4, fourth 1/5,fifth for 1/6, sixth 1/7,seventh return to normal playback speed.
REMOTE CONTROL OPERATION SETUP 1.Press SETUP (23) key of remote control in the stop mode.(Press the STOP button twice to ensure the player is under STOP mode. 2.The main page of setup menu is displayed. 3.Select the preferred item by using the (4)button 4.Press (6) ENTER button A. System Setup This setup page includes all the items of TV system, Screen saver ,TV type, Password, Rating & Default features. The detail please refer to SYSTEM SETUP MENU. B.
REMOTE CONTROL OPERATION MIXED FILE FORMAT DISC While you listen to(or watching) mixed file format disc, which is together with MP3, WMA, JPG or MPEG4 formats, just insert the disc into the disc slot, the mechanism will auton-atically switch on.
SETUP 4. TV Type A. SYSTEM SETUP Enter the password and press ENTER button. Type the old password ( The instal factory code is 0000 ) and key in 4 characters password now you want to use, and type again to confirm. 1. TV System This player can play discs recorded in either PAL or NTSC format. Select NTSC format when you connected to NTSC TV. Select PAL format when you connected to PAL TV. If you select AUTO, the unit will auto select the format (PAL/NTSC) according to your TV system. 5.
SETUP 6. RATING 7. Default Recover acquiescing in state when leaving the factory. Select suitable guidance rating by he cursor button and confirmed by pressing ENTER button. Rating 1: [Kid Safe] Select this when the programs are safe to all kid view. Rating 2: [G] Select this that allows admission to person of all ages. Rating 3[PG] Select this that needs parental guiding their children. Rating 4[PG13] Select following when children under 13 are forbidden to view.
SETUP 2. AUDIO Language 5. DIVX[R] VOD Language 3. SUBTITLE Language C. AUDIO SETUP SPDIF/OFF Analog or optical output port all has not output signal. 4. MENU Language a. Audio Out This is to activate the audio output from ANAL OG/OPTICAL mode to SPDIF/ RAW mode or SPDIF/PCM mode.
SETUP SPDIF/RAW: b. key When the player is connected with the power amplifier by the analog or optical port, please select this item; when the playing disc which is recorded by Dolby Digital, DTS or MPEG recoding system, the analog or optical output signal of the unit will be the same as the digital signal (RAW format ) of the playing disc. At the same time, the power amplifier you connected must have the decode function of Dolby Digital, DTS or MPEG.
SETUP This is for the user to set operation mode, dynamic range compression and stereo mode. To set the operating modes for Dobly Digital decoder.
INSTALLING THE FRONT PANEL To install the front panel, insert the panel into the housing and make sure the panel Is properly installed, otherwise, abnormalities occurs on the display or some keys will not function properly. DETACHING THE FRONT PANEL Press REL button in the upper left corner, and hen front panel will not function properly. REMOVING THE FRONT PANEL When the front panel was turned down to a position of 90°, hold and slide the front panel to left, and then pull it out.
UNIT INSTALLATION 1. Dashboard 2. Nut (5mm) 3. Spring Washer 4. Screw (5 x 25mm) 5. Screw 6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain Washer Fastening the unit to the factory radio mounting bracket: 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 places on each side.
SPECIFICATON GENERAL Power Supply Requirements: Load lmpedance: Maximum Output Power: Chassis Dimensions: DVD DECK SECTION Discs Played: DC 14.4V, Negative Ground 4 ohms 80W x 4(CH) 178x163x50mm(WxDxH) Video system: Mounting Angle: DVD, MPEG4,DIVX,VCD 1.0/2.0/3.0,MP3 WMA, CD, CD-R, CD-RW, Picture-CD AUTO/PAL/NTSC 0° ～ 30° VIDEO SECTION Video System: Video Output Level: 4:3 Letter Box, 4:3 Pan Scan,16:9 1.0V p-p 75 ohms TFT SIZE: 3.
