BHD3F HARLEY DAVIDSON FRONT SYSTEM FITS SELECT 1998+ HARLEY DAVIDSON ROAD GLIDE AND STREET GLIDE MOTORCYCLES
BHD3F Harley Davidson Front System Congratulations on your purchase of a POWERSPORTS Speaker System. It has been engineered to bring you the highest level of performance. Its quality will afford you years of listening pleasure. The BHD3F is the first of its kind to fit 1998 to present Harley Davidson Road Glide and Street Glide models all in one package.
BHD3F Harley Davidson Front System What is included? Before you begin installation please check that your system contains the following contents: Speaker install kit contents: (1) (2) (4) (5) (3) (6) 1PC 4x25mm 8PC 8PC (7) 5x25mm 3PC (8) (1) HD Street Glide Grills (x2) (5) Speaker adapters (x2) (2) HD Tour Pak Grills (x2) (6) EVA for speaker adapter (x2) (3) HD Road Glide Grills (x2) (7) Screw bag for speaker (4) Boss Audio 6.
BHD3F Harley Davidson Front System GETTING STARTED 1. Protect all painted surfaces. 2. Remove seat and disconnect negative battery terminal. 3. On 2009 and later models, it will help to remove the two T40 bolts, the ECM and tray HD Front Speaker installation 1998 – 2013 Street Glide /Batwing models: 1. Cover the front fender. 2.
BHD3F Harley Davidson Front System 3. Remove (2) T-27 Torx bolts from outer edges of inner fairing near the fork tubes (facing forward) 4. Remove (3) T-27 Torx bolts from bottom edge of windshield. Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing. 5. Remove windshield taking caution that the outer fairing is loose. 6.
BHD3F Harley Davidson Front System 2014 – 2020 Street Glide / Batwing models: 1. Cover the front fender. 2. Remove (2) T-27 Torx bolts from inner fairing (under mirrors) 1. Cover the front fender. 2.
BHD3F Harley Davidson Front System Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing. 5. Remove windshield taking caution that the outer fairing is loose. 6. Lift away and unplug headlight to remove outer fairing. 7. Remove the remaining speaker screws and the speaker.
BHD3F Harley Davidson Front System 2. Lift away the fairing, unplug the headlights and remove. 4. Remove the speaker screws and the speaker. 2014 + Street and Road Glide 1. Using 3 of the screws in the provided hardware, mount the speaker adapter to the inner fairing. The 4th inner bottom screw locations are not used on FLH/ batwing models.
BHD3F Harley Davidson Front System (10) (9) (8) (13) (12) (11) (16) (15) (14) (1) Ultra Classic Street Glide and Tri Glide bracket (x1) (2) Road Glide mounting bracket (x1) (3) Road Glide mounting bracket (x1) (4) Universal Amp mounting plate (x1) (5) Road Glide Amp mounting bracket (x1) (6) Front speaker input for the Amplifier (White/Black) (x1) (7) Front speaker input for the Amplifier (Gray/Black) (x1) (8) Input from Amplifier front (x1) (9) Output from Amplifier front (x1) (10) Remote wire and p
BHD3F Harley Davidson Front System Step 1 - Mounting Plate and Bracket Mounting With the front faring removed. Using the Type(4) bracket, align bracket on the bottom side of the mounting plate using the bracket type indicators. On the top edge, you will screw in the two threaded pins into the mounting plate. These are used to align the mounting plate with the rubber bushings on top of the factory radio.
BHD3F Harley Davidson Front System HD Street Glide 98 – 13 Step 2 - Mounting Plate and Bracket Mounting Using the Type(1) and Type(4) brackets, align bracket on the bottom side of the mounting plate using the bracket type indicators. On the top edge, you will screw in the two threaded pins into the mounting plate. These are used to align the mounting plate with the rubber bushings on top of the factory radio.
BHD3F Harley Davidson Front System Step 3 - Amplifier Mounting Mount amplifier upside down with the supplied screws to the mounting plate. Align the amplifier to the appropriate holes on the plate. Amplifier Wiring Once the amplifier is mounted, you can now begin plugging in the wiring harness in their appropriate sockets. Plug the switched power harness into the 2-pin amp connector on the throttle side of the fairing. Note: Be careful when plugging in the harnesses to the appropriate socket.
BHD3F Harley Davidson Front System Step 6 - Rear Speaker Installation With the seat already removed, route the Rear Speaker Harness toward the rear of the motorcycle over the fender along the brake side of the motorcycle. Unplug factory speaker wires from the speaker and plug them directly into the Rear Speaker Input / Output Harness. These are labeled clutch and brake side.
BHD3F Harley Davidson Front System Amplifier and Amp plate Installation 2014 – Newer Road Glide FLTR 2015 – Newer: *NOTE* after installation this vehicles head unit must be flashed to get proper sound from the upgraded system. Please see the following link to find a recommended HD shop that can flash the stock system. https://technoresearch.info/tuning-centers-map/ 1. Remove the radio. Unplug the four connectors on the back of the radio. Remove the four Allen head bolts holding the radio to the chassis.
BHD3F Harley Davidson Front System This kit comes ready to plug directly into 2014 & Up Harley-Davidson Motorcycles using the factory style connectors. If you are installing on a 1998-2013 motorctcle, you will need to use the wire connector adapters to connect to the factory wire harness and new speakers. NOTE: This wiring diagram is for a standard 4-Channel amplifier installation. If you are using a 2-Channel amplifier, DO NOT use the Rear Input / Output Harness.
0121
