Owner's Manual

OPTIONAL
To remove the distance guide lines:
1. Turn the system OFF before proceeding
2. Cut the white loop wire located at the connection points
(camera end).
3. Insulate the wire, using tape or crimp connectors on both ends.
4. Reconnecting the wire will display the guide lines again.
To invert the camera image:
1. Turn the system OFF before proceeding
2. Cut the blue loop wire located at the connection points (camera end)
3. Insulate the wire, using tape or crimp connectors on both ends.
4. Reconnecting the wire will orient the image back to its original position.
SPECIFICATIONS
Power Supply DC12v
Lens Angle (Deg.)
170°
TV System NTSC
Video Output 1 .0vp-p, 7S!l
5/N Ratio <48dB
IP Rating IP68
Operating Temp. (Deg. C) -30°C ~ +70°C (RH 95% Max,)
White Balance Auto
Minimum Illumination 0.S LUX
AGC Auto
Resolution (TV Lines)
480
Electronic Shutter
1/60 (NTSC)
Effective Pixels 628x586
Above parameters can be modified without notification.
BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com
800-999-1236
US Toll-free
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support/technical-support
USER'S MANUAL
ELPC40B
REAR VIEW LICENSE PLATE
MOUNT CAMERA
DO NOT FULLY RELY ON REVERSE CAMERA
WHEN BACKING
UP.
ALWAYS CHECK YOUR SURROUNDINGS
BEFORE BACKING UP.
ao~s
AUDIO SYSTEMS
ELJIE