User Manual

15
Description of Each Mode
2. Depress the pedal to get the tempo
you want.
The speed changes to match the tempo
entered by pressing the pedal, and the
CHECK indicator will flash in sync with
the tempo.
Available range for the tempo:
200 mSec – 4 Sec
3. With the DECAY knob, adjust the
wah effect time.
4. When you have finished setting the
tempo, once again step on the pedal
switch, and keep it down for two or
more seconds.
You exit the tempo setting mode, and the
pedal switch reverts to its normal func-
tion of turning the effect on and off.
* Immediately after exiting the tempo
setting mode, the effect stays on, with
Auto Wah in effect.
◆ When connected to the EXP/CTL jack,
the optional FS-5U is used for setting
the tempo, and the AW-3’s pedal
switch then only turns the effect on
and off. While the tempo can be set as
usual, the effect can also be switched
on and off.
* Refer to “Using the EXP/CTL Jack” (p. 16).
◆ When a Roland EV-5 (sold separately)
is connected to the EXP/CTL jack, this
becomes a pedal wah, and the DECAY
knob functions are disabled.
* Refer to “Using the EXP/CTL Jack” (p. 16).