User Manual
Table Of Contents
- USING THE UNIT SAFELY
- Main Features
- IMPORTANT NOTES
- Panel Descriptions
- Quick Start
- Chapter 1 Before Composing Rhythm Patterns and Songs
- Chapter 2 Playing Patterns (Pattern Play Mode)
- Chapter 3 Recording and Editing Patterns (Pattern Edit Mode)
- Before You Start Recording
- <1> Select an Unrecorded Pattern
- <2> Select the Beat
- <3> Select the Measures
- <4> Select the Drum Kit
- <5> Set the Quantization
- <6> Record the Basic Pattern
- <7> Record the Fill Pattern
- Erasing Patterns (Pattern Clear)
- Copying Patterns
- Replacing Drum Kits
- Changing the Key of the Bass Part (Key Transpose)
- Chapter 4 Recording and Editing Songs (Song Edit Mode)
- Before You Start Recording
- <1> Select an Unrecorded Song
- <2> Select the Tempo (Initial Tempo)
- <3A> Do Realtime Recording
- <3B> Do Step Recording
- Adding Patterns In the Song (Insert)
- Deleting Patterns (Delete)
- Removing Unneeded Song (Song Clear)
- Copying Song
- Connecting Multiple Songs Into One Song (Song Chain)
- Chapter 5 Performing Songs (Song Play Mode)
- Chapter 6 Assigning Patterns to the Key Pads (DPP Assign Mode)
- Chapter 7 Customizing Your Setup (Utility Mode)
- Chapter 8 Creating Your Own Favorite Drum Kits (Drum Kit Edit Mode)
- Before Changing the Settings (Editing)
- Editing the Drum Parts
- Selecting the Sounds Assigned to the Key Pads (Instrument)
- Setting the Volume (Level)
- Setting the Pitch (Pitch)
- Lengthening and Shortening the Reverberation (Decay)
- Obtaining Tonal Changes Relative to Strike Position (Nuance)
- Setting the Position of the Sound (Pan)
- Determining Whether Or Not Sounds Overlap (Assign Type)
- Editing the Bass Part
- Copying Drum Kits
- Chapter 9 Connecting and Using External MIDI Devices (MIDI Mode)
- What is MIDI?
- About MIDI Mode
- Synchronizing Performances with a Digital Recorder or MIDI Sequencer (Sync Mode)
- Using An External MIDI Device to Play the DR-670/ Using the DR-670 to Play An External MIDI Device
- Transmitting the DR-670’s Data to an External MIDI Device/ Returning Transmitted Data to the DR-670
- Returning Transmitted Data to the DR-670 (Bulk Load)
- Using in Combination with the BR-8
- Error Message List
- Troubleshooting
- Operation List
- Parameter List
- Instrument/Bass Tone List
- Preset Drum Kit List
- Preset Pattern List
- MIDI Implementation Chart
- Specifications
- Index
90
Chapter 9 Connecting and Using External MIDI Devices (MIDI Mode)
Returning Transmitted Data
to the DR-670 (Bulk Load)
fig.09-13
To carry out Bulk Load, perform the following
procedure from MIDI mode.
1.
Press [ ] [ ] to select “RX
BULK.”
fig.09-14
2.
Transmit the data from the connected MIDI
device.
Bulk Load starts, and the REC indicator
lights up.
After a few moments, the REC indicator
goes out, and the Bulk Load is completed.
Using in Combination
with the BR-8
The following is an introduction to using the
DR-670 in combination with the BR-8.
Connecting
fig.09-15
■
Synching the DR-670’s Patterns
and Songs with the BR-8
This synchronizes the performances of the DR-
670’s songs and patterns to songs recorded on
the BR-8.
In this case, the BR-8 is the master, and the DR-
670 is the slave.
Making the BR-8 Settings
Use the following procedure to make the
settings for the BR-8.
1.
Press [UTILITY].
2.
Press CURSOR [ ] [ ] to select the Sync
icon, then press [ENTER].
3.
Use [CURSOR] and the TIME/VALUE dial
to set “Gen.” to “MIDI CLOCK.”
4.
Press [EXIT] enough times to return to the
Level Meter screen.
MIDI OUT
Transmit device
(MIDI Sequencer etc.)
MIDI IN
Receive device
(DR-670)
MIDI OUT L R L R
BR-8
MIDI IN
DR-670
Mixer
DR-670.e.book 90 ページ ２００６年１０月１８日 水曜日 午後３時１２分